Model |
HBS860H |
|||
Type |
DSP Closed loop stepper drive |
|||
maximum peak current |
8A |
|||
Impulse response frequency |
200KHz |
|||
Micro-stepping driver |
200~51200ppr |
|||
Voltage |
20~80VAC/DC30-110V |
|||
Protective function |
Over voltage, over current, tracking error, overproof |
|||
Signal input |
Support PUL/DIR and CW/CCW modes (difference) Compatible 5~24V signal (Don't need a resistor) |
|||
Advantage |
no step to lose, Low noise, little vibration and high efficiency, low heat |
|||
Continuous overload |
Output an alarm signal |
|||
Type of cooling |
Air-cooling |
|||
|
Min |
Typical |
Max |
Unit |
Output Current |
- |
- |
8 |
A |
Input Voltage |
20 |
70 |
75 |
VAC |
|
30 |
|
110V |
VDC |
Logic Signal Current |
7 |
10 |
16 |
mA |
Pulse input frequency |
- |
200 |
- |
kHz |
Isolation Voltage |
500 |
|
|
Mohm |
Model |
86HBS45 |
Step angle/phase |
1.8 degree |
Rated voltage/current |
2.24V/5.6A |
resistance |
0.4ohm |
Inductance |
2.6mH |
Hold torque |
4.5NM |
Encoder |
1000line |
Class of insulation |
B |
Rotor inertia |
1400 g.cm2 |
Model |
S-1000-60 |
Output voltage |
60Vdc |
Max output Power |
1000W |
Max output current |
17A |
AC input voltage range |
0-240V 50hz (110V Optional, different price) |
16-circuit optocoupler coupling isolation |
|
Output interface |
Ordinary digital 3-circuit optocoupler coupling isolation |
0-10V spindle control port with analog quantity(can be modified as PWM output); |
|
Axis No. |
Support the 3 axis stepper motor control, |
Single axis Pulse |
Max 500Khz |
Main control chip |
ARM9 |
Core algorithm chip |
FPGA |
Screen |
5 inches TFT 480*272 |
Operational keys |
17 |
Power supply |
24VDC power input, minimum Current is 0.5A |
G Code |
USB flash disk support for G code file input,no size limited of the G-code file |
MPG port |
Support the general MPG in the market |
Other |
Jog function for each axis (continuous, step, defined distance) |
Support the operation of quickly specify the running position |
|
Support for “Power Cut” recovery. Data is automatically saved |
|
Support the origin and Limit share the same Input ports |
|
The controller only support NPN type limited switch |
|
1GB internal memory |