ETCR9310B Large Caliber Wireless H/L Voltage Clamp Current Meter 0.00A～9999A
Notice:
The standard package don't include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.
At the same time, please forgive us that we are unable to provide the English user manual. If you need it, please contact the customer service after purchase.
Thanks for your support!
Product Main Function
1. High voltage AC current measurement, low voltage AC current and online AC current monitoring
2. MeasurementRange ：0.00A～9999A(50/60Hz automatic)
3. DataStorage：99 groups
4. Test Mode : Non-contact U-type CT, realizes the unimpeded measurement
5. CT Size : Ф68mm
ETCR9310B Large Caliber Wireless H/L Voltage U-Type Current Meter break through the traditional structure, specially designed and manufactured for measuring high voltage current, the unique u-type opening structure realizes the unimpeded measurement, and the field test is very convenient. The meter is composed of special large-caliber U-type ammeter with high-voltage insulation rod, equipped with wireless receiver, which can receive measured data within 100 meters straight, current range: AC 0.00A-9999A. For low voltage lines below 600V, the line current can be measured directly by hook meter without insulation rod.
ETCR9310B Large Caliber Wireless H/L Voltage U-Type Current Meteris used for current measurement of high voltage circuit below 550kV (should connect insulation rod to use). Below 600V circuit no need the insulation rod, and use the u-type current meter to measure directly.The meter has data hold and data storage function. Insulation rod is equipped with adjustable interface, u-type clamp the measured wire by insulation rod is very convenient, save time and faster. Widely used in substation, power plant, industrial and mining enterprises, detection stations, electrical maintenance departments for current detection and field electrical work etc.
It can also replace the H/L voltage turns ratio tester, which can measure the H/L voltage current of the primary circuit and secondary circuit respectively, and then calculate to get the H/L voltage turns ratio. Insulation rod is portable, with moisture-proof, high temperature resistance, impact resistance, bending resistance, high insulation, telescopic and other characteristics.
Technical Parameter
|
Function
|
Description
|
|
Function
|
High voltage AC current measurement, low voltage AC current and online AC current monitoring
|
|
Power Supply
|
6V DC(LR03×4 alkaline dry batteries)
|
|
Test Mode
|
Non-contact U-type CT
|
|
Transmission Mode
|
433MHz wireless transmission, transmission distance is about 100 meters
|
|
Display Mode
|
4-digit LCD display, backlight function, suitable for measurement in dark place
|
|
LCD Size
|
47mm×28.5mm
|
|
Meter Size
|
Detector:107mm×252mm×31mm
|
|
Receiver:78mm×165mm×42mm
|
|
CT Size
|
Ф 68mm
|
|
Insulation Rod Dimension
|
Ф45mm, Contraction state: 1150mm; Stretched state: 4500mm.
|
|
Insulation Rod Voltage Level
|
110KV
|
|
Sampling Rate
|
2 times / second
|
|
Measurement Range
|
0.00A～9999A(50/60Hz automatic)
|
|
Resolution
|
0.01A
|
|
Shift
|
0.00A～9999A automatic shift
|
|
Test Accuracy
|
±2%±5dgt (The wire is near the center of the bottom end of the U-type clamp,23℃±2℃)
|
|
Position Error
|
The measured conductor should be located as close as possible to the center of the bottom end of the U-type clamp.
|
|
Data Storage
|
99 groups , in storage process “MEM” symbol display, “FULL” symbol flash display indicate storage is full
|
|
Line Voltage
|
Below 110kV current test , operate with insulation rods ( below 500kV can be customized）
|
|
Data Hold
|
In general test mode, press HOLD key to hold data, “HOLD” symbol display. press HOLD Key once again to cancel this function
|
|
Data Access
|
“MR” symbol display, it can look over all the stored data
|
|
Overflow Display
|
Exceed measurement range overflow function: “OL A” symbol display
|
|
No Signal Indication
|
When the receiver has not received transmit signal, dynamic display “no- -”symbol
|
|
Automatic Shut Down
|
15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption
|
|
Battery Voltage
|
When battery voltage is lower than 4.8V±0.2V, low battery voltage symbol will display and remind to replace battery.
|
|
Meter Weight
|
Detector: 235g; Receiver: 280g
|
|
Meter total weight: 2300g
|
|
Working Temperature
|
-10℃ ~ 40℃; Below 80%Rh
|
|
Store Environment
|
-10℃～60℃; Below 70%rh
|
|
Interference
|
Should try to avoid 315MHz, 433MHz same-frequency signal interference
|
|
Insulation Strength
|
AC 220kV/rms(The telescopic insulation rod is fully opened between the two ends)
|
|
Structure
|
Anti-Dripping Type II
|
|
Detector
|
1 PCS
|
|
Receiver
|
1 PCS
|
|
Wireless Antenna
|
1 PCS
|
|
Stretch Insulation Rod（4.5m）
|
1 PCS
|
|
Meter Case
|
1 PCS
|
|
Manual/Warranty Card/Certificate
|
1 SET
|
