Step angle/phase | 1.8 degree |
Rated voltage/current | 4.52V/4A |
resistance | 1.13ohm |
Inductance | 3.6mH |
Hold torque | 3NM |
Encoder | 1000line |
Class of insulation | B |
Rotor inertia | 800 g.cm2 |
Driver Specifications :
Power Supply Specifications :
Model | HBS57 |
Type | 32Bit DSP Closed loop stepper drive |
maximum peak current | 5A/Pha |
Impulse response frequency | Max. 200KHz |
Micro-stepping driver | 2-256 subdivision, Max 51200ppr |
Voltage | DC24V-60V |
Protective function | Over voltage, over current, tracking error, overproof |
Signal input | Support PUL/DIR and CW/CCW modes (difference) |
Compatible 5~24V signal (Don’t need a resistor) | |
Advantage | no step to lose, Low noise, little vibration and high efficiency, low heat |
Continuous overload | Output an alarm signal |
Type of cooling | Natural cooling |
Alarm, position signal | Yes |
Impulse type | Single impulse (Default), double impulse (need modify by soft) |
Size | 118*75*34(mm) |
Power Supply Specifications :
Model | S-600-48 |
DC output voltage | 48V |
Rated Output current | 12.5A |
AC input voltage range |
176~264VAC 47~63Hz (110V Optional, different price) |
Size | 238*124*65mm (L*W*H) |
DDCSV Controller :
16-circuit optocoupler coupling isolation |
|
Output interface |
Ordinary digital 3-circuit optocoupler coupling isolation |
0-10V spindle control port with analog quantity(can be modified as PWM output); |
|
Axis No. |
Support the 3 axis stepper motor control, |
Single axis Pulse |
Max 500Khz |
Main control chip |
ARM9 |
Core algorithm chip |
FPGA |
Screen |
5 inches TFT 480*272 |
Operational keys |
17 |
Power supply |
24VDC power input, minimum Current is 0.5A |
G Code |
USB flash disk support for G code file input,no size limited of the G-code file |
MPG port |
Support the general MPG in the market |
Other |
Jog function for each axis (continuous, step, defined distance) |
Support the operation of quickly specify the running position |
|
Support for “Power Cut” recovery. Data is automatically saved |
|
Support the origin and Limit share the same Input ports |
|
The controller only support NPN type limited switch |
|
1GB internal memory |