Description:
5V 1A
1. Input: 5V 1A
2. Output: Dual output 5V 1A
3. Conversion rate: an average of 85%
4. Features: With LED light (long press or double-click the start button to open)
5. Power display: 4 LED lights display power, intelligent automatic shutdown in non-working state
6. Charging display: 0 - 25%, the first light flashes, other lights are not bright,
Charging to 25% - 50%, the second xenon lamp flashes, the first xenon lamp becomes constant,
When the third xenon lamp flashes, it charges to 50% - 75%, and the first two lights are always on.
Charging to 75% - 100% The fourth indicator flashes, the first three indicators turn to the constant indicator, all four indicators are charged to 100%
Safety design:
1. the power supply design overcharge, over discharge, short circuit protection circuit, do not worry about charging time is too long, free users worry.
2. intelligent output, after the device is fully charged, automatically stop charging, to prevent overshoot of mobile phones.
3. the power supply has multiple safety design, the output voltage and current are stable, and will not harm the user equipment.
4. wide operating temperature range (-20°C~60°C), with over temperature protection.
The power supply shows 2A current. The actual output can be installed inside 6 or 4 18650 batteries, or it can be equipped with a polymer lithium battery.
Installation Notes:
1: Circuit board B-- is the battery negative pole, B + is the positive pole, do not reverse, then refuse to burn the circuit board, the battery is soldered in parallel, when the battery is assembled, pay attention to the insulated circuit board between the battery and the insulator, Do not touch the battery leads to the circuit board to avoid short circuits."
Package Included:
1 x 5V 1A Power Bank Charger Module Step Up Boost Dual USB LED PCB Circuit Board
5V 1A 2A (Hardware)
5V 1A
1. Input: 5V 1A
2. Output: Dual output 5V 1A
3. Conversion rate: an average of 85%
4. Features: With LED light (long press or double-click the start button to open)
5. Power display: 4 LED lights display power, intelligent automatic shutdown in non-working state
6. Charging display: 0 - 25%, the first light flashes, other lights are not bright,
Charging to 25% - 50%, the second xenon lamp flashes, the first xenon lamp becomes constant,
When the third xenon lamp flashes, it charges to 50% - 75%, and the first two lights are always on.
Charging to 75% - 100% The fourth indicator flashes, the first three indicators turn to the constant indicator, all four indicators are charged to 100%
Safety design:
1. the power supply design overcharge, over discharge, short circuit protection circuit, do not worry about charging time is too long, free users worry.
2. intelligent output, after the device is fully charged, automatically stop charging, to prevent overshoot of mobile phones.
3. the power supply has multiple safety design, the output voltage and current are stable, and will not harm the user equipment.
4. wide operating temperature range (-20°C~60°C), with over temperature protection.
The power supply shows 2A current. The actual output can be installed inside 6 or 4 18650 batteries, or it can be equipped with a polymer lithium battery.
Installation Notes:
1: Circuit board B-- is the battery negative pole, B + is the positive pole, do not reverse, then refuse to burn the circuit board, the battery is soldered in parallel, when the battery is assembled, pay attention to the insulated circuit board between the battery and the insulator, Do not touch the battery leads to the circuit board to avoid short circuits."
Package Included:
1 x 5V 1A Power Bank Charger Module Step Up Boost Dual USB LED PCB Circuit Board
5V 1A 2A (Hardware)
1. Size: 69.37*20.54*6.42mm
2. Input: 5V 1A
3. Output: 5V 1A or 5V 2A
4. Input Interface: V8, micro USB port
5. The amount of electricity Display: 4 grade LED lamp to display the amount of electricity, non-operating state of automatic shutdown
6. charging display:
when charging 0-25%, the first light will flash, and other lights are off;
when charging 25% -50%, the second light flashes, and the first light stays on;
when charging 50% -75%, the third light flashes, and the first two lights remain on;
when charging 75% -100%, the fourth light will flash, and the first three lights to stay on;
then the four lights are all as long as the charge at 100%
Notice:
1. Adaptive Battery: 3.7-4.2V polymer battery
2. Protection function: overvoltage protection, overcurrent protection, undervoltage protection
3. Charge input requirement: the most advisable is over 5V 1A charger, and all other 5V constant vltage power supply can also be used.
2. Input: 5V 1A
3. Output: 5V 1A or 5V 2A
4. Input Interface: V8, micro USB port
5. The amount of electricity Display: 4 grade LED lamp to display the amount of electricity, non-operating state of automatic shutdown
6. charging display:
when charging 0-25%, the first light will flash, and other lights are off;
when charging 25% -50%, the second light flashes, and the first light stays on;
when charging 50% -75%, the third light flashes, and the first two lights remain on;
when charging 75% -100%, the fourth light will flash, and the first three lights to stay on;
then the four lights are all as long as the charge at 100%
Notice:
1. Adaptive Battery: 3.7-4.2V polymer battery
2. Protection function: overvoltage protection, overcurrent protection, undervoltage protection
3. Charge input requirement: the most advisable is over 5V 1A charger, and all other 5V constant vltage power supply can also be used.
Package Included:
1 x 5V 1A 2A Micro USB Mobile Power Charger Module
5V 1A 2A (Software)
100% brand new and high quality
Output: DC 5V / 2A (Maximum)
Input: DC 5V / 1A Android line interface
Precautions:
The battery must be connected in parallel rather than in series.Pre-test before the next voltage.
As long as a bad battery will affect the entire group of batteries.Clear positive and negative.
Once wrong,the motherboard and IC will be destroyed.
The exposed part of the wiring to be wrapped to avoid aluminum The shell hits the board and damages the board
No Retail Packages
Quantity: 1PC
Note:
Manual measuring, please allow 1-2mm error, thank you.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!!
Package Included:
1 x Power Bank Charger PCB Board Module
5V 2A Daul USB (Blue)
5V 2A Daul USB (Black)
100% brand new and high quality.
Input: 5V 1A
Output: dual output 5V 1A/2A
Conversion rate: average 85%
With a LED light (long press or double-click the boot button can be opened).
Power display: 4 LED lights show power, non-working state intelligent automatic shutdown.
Charging display:
Charging to 0-25% ,first light flashes, other lights do not light;
Charging to 25% - 50%, the second light flash,The first light becomes constant;
Charging to 50% - 75% when the third light is flashing, the front two lights to constant light;
Charging to 75% ---100% The fourth light flashes, the front three lights turn to constant light, four lights full charge to 100%.
Safe design:
1. power design overcharge, over discharge, short circuit protection circuit, do not worry about charging time is too long, free users to worry about.
2. intelligent output, the device is fully charged, the automatic stop charging, to prevent the phone and other overshoot.
3. the power supply has multiple safety design, the output voltage and current stability, will not hurt the user equipment.
4. wide operating temperature range (-20°C~60°C), with over-temperature protection.
Power display 2A current actual output can be installed inside 6 and 4 18650 battery can also be equipped with polymer lithium battery.
Installation Notes:
The circuit board B - for the battery negative, B + for the positive.
Do not reverse, and then refused to burn the board, the battery is parallel welding.
When the battery assembly, pay attention to the insulation between the battery and the circuit board.
The battery lead do not touch the circuit board, so as to avoid short circuit.
Specifications:
Material: Electronic components
Color: shown as pictures
Size: 70×32×8mm/2.76×1.26×0.31in
Quantity: 1 PC
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 x 2-Port USB Power Bank Charger Module Circuit Board
5V 2.1A
5V 2.1A 3USB
100% brand new and high quality.
Apply Battery Type: 18650 battery(not include)
Output Voltage: 5V 2.1A
Input Voltage: 5V 1A
Instructions: Level 4 Capacity indicator
Lighting: with LED lights
Rated Voltage: 3.7V (Suit for 3.2V-4.2V. The batteries are in parallel)
Specifications:
Material: Electronic components
Color: shown as pictures
Size: 62×18×8mm/2.44×0.71×0.31in
Quantity: 1 PC
Note:
1. Transition: 1cm=10mm=0.39inch
2. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 x 3-Port USB Circuit Board (The battery is not included)
5V 1A 2A (Software)
1. Size: 69.37*20.54*6.42 mm
2. Input: 5V 1A
3. Output: 5V 1A or 5V 2A
4. Input interface: V8 port, micro USB
5. Power display: 4 levels of LED lights display power, automatic shutdown in non-working state
6. Charging display: When charging 0-25%, the first light flashes, the other lights are off; when charging 25%-50%, the second light flashes, the first light is on; when charging 50% - 75%, the third The xenon lamp will flash and the first two lights will remain on; when charging 75%-100%, the fourth lamp will flash and the first three lamps will remain on; then all four lamps will be lit until they are charged to 100. %
2. Input: 5V 1A
3. Output: 5V 1A or 5V 2A
4. Input interface: V8 port, micro USB
5. Power display: 4 levels of LED lights display power, automatic shutdown in non-working state
6. Charging display: When charging 0-25%, the first light flashes, the other lights are off; when charging 25%-50%, the second light flashes, the first light is on; when charging 50% - 75%, the third The xenon lamp will flash and the first two lights will remain on; when charging 75%-100%, the fourth lamp will flash and the first three lamps will remain on; then all four lamps will be lit until they are charged to 100. %
Note:
1. Adaptive battery: 3.7-4.2V polymer battery
2. Protection function: overvoltage protection; overcurrent protection; undervoltage protection
3. Charging input requirements: It is best to use 5V 1A or more chargers, and other 5V constant voltage power supplies.
1. Adaptive battery: 3.7-4.2V polymer battery
2. Protection function: overvoltage protection; overcurrent protection; undervoltage protection
3. Charging input requirements: It is best to use 5V 1A or more chargers, and other 5V constant voltage power supplies.
Package Included:
1 x Step Up Power Supply Module
5V 2A
5V 2A
Output: DC 5V / 2A (Maximum)
Input: DC 5V / 1A Android line interface
Precautions:
The battery must be connected in parallel rather than in series.Pre-test before the next voltage.
As long as a bad battery will affect the entire group of batteries.Clear positive and negative.
Once wrong,the motherboard and IC will be destroyed.
The exposed part of the wiring to be wrapped to avoid aluminum The shell hits the board and damages the board
No Retail Packages
Quantity: 1PC
Note:
Manual measuring, please allow 1-2mm error, thank you.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!!
Package Included:
1 x Power Bank Charger PCB Board Module
5V 2A Daul USB (Blue)
100% brand new with high quality
Input Parameter: 5V/1A
Input Interface: V8 interface micro USB
Output Parameter: double USB output: 5V/2A
Conversion Rate: 90% average
Safe Design:
Power has designs of overcharge, over discharge, short circuit protection, does not need to worry about the time of charging
Power has designs of overcharge, over discharge, short circuit protection, does not need to worry about the time of charging
Intelligent Output. When equipment is fully charged, it will stop charging automatically to prevent from overcharging
Power has multiple safe designs. Output voltage and current is stable, never to damage user's device
Operating temperature range is wide (-20°C~50°C), can provide over temperature protection
Feature:
With a highlight LED lamp (long press or double click power key can start)
Electricity Quantity Display: 4 class LED light display electricity quantity, non-operating state will be intelligently off
Charging Display:
When charging
0~25% one light is on, other light is off;
25%--50%, the second light flashes, the first light is continuously on;
50%-- 75%, the third light flashes, front two lights are continuously on;
75%---100%;the fourth light flashes, front three lights are continuously on.
And four lights are on charging to 100%.
Mainboard Protection Function: overcharge protection, over discharge protection, over current protection. Power does not need protection board. If you have it, please unload.
0~25% one light is on, other light is off;
25%--50%, the second light flashes, the first light is continuously on;
50%-- 75%, the third light flashes, front two lights are continuously on;
75%---100%;the fourth light flashes, front three lights are continuously on.
And four lights are on charging to 100%.
Mainboard Protection Function: overcharge protection, over discharge protection, over current protection. Power does not need protection board. If you have it, please unload.
Installation Introduction:
Circuit board B- connects power negative, B+ connects positive. Don't inversely connect; it will result in burning of board.
Power is series soldering, so please make sure the insulation between power and circuit when install the battery.
Double press the switch, flashlight LED light starts, then double press turn it off.
Double press starts flashlight, then press once, light will be lighting. Then touch once start SOS mode, and press one more time turn off LED.
2A output is not continuous current; it changes according to USB connecting load automatic current output.
Insurance resistor. If battery connects incorrectly, the polarity will burn.
Package Included:
1 x Power Bank Charger Board
Note:
Note:
Please allow minor error due to manual measurement.
The colors may be a little difference for the different monitor display.
5V 2A Daul USB (Black)
100% brand new and high quality.
Input: 5V 1A
Output: dual output 5V 1A/2A
Conversion rate: average 85%
With a LED light (long press or double-click the boot button can be opened).
Power display: 4 LED lights show power, non-working state intelligent automatic shutdown.
Charging display:
Charging to 0-25% ,first light flashes, other lights do not light;
Charging to 25% - 50%, the second light flash,The first light becomes constant;
Charging to 50% - 75% when the third light is flashing, the front two lights to constant light;
Charging to 75% ---100% The fourth light flashes, the front three lights turn to constant light, four lights full charge to 100%.
Safe design:
1. power design overcharge, over discharge, short circuit protection circuit, do not worry about charging time is too long, free users to worry about.
2. intelligent output, the device is fully charged, the automatic stop charging, to prevent the phone and other overshoot.
3. the power supply has multiple safety design, the output voltage and current stability, will not hurt the user equipment.
4. wide operating temperature range (-20°C~60°C), with over-temperature protection.
Power display 2A current actual output can be installed inside 6 and 4 18650 battery can also be equipped with polymer lithium battery.
Installation Notes:
The circuit board B - for the battery negative, B + for the positive.
Do not reverse, and then refused to burn the board, the battery is parallel welding.
When the battery assembly, pay attention to the insulation between the battery and the circuit board.
The battery lead do not touch the circuit board, so as to avoid short circuit.
Specifications:
Material: Electronic components
Color: shown as pictures
Size: 70×32×8mm/2.76×1.26×0.31in
Quantity: 1 PC
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 x 2-Port USB Power Bank Charger Module Circuit Board
5V 2.1A
Output: DC5V/2A max, input DC5V/1A, Android line interface
Battery voltage: 3.7-4.2 lithium battery (not include)
Note: the battery must be in parallel rather than in series. Test voltage before installation. One bad battery will affect the whole group battery. Recognize the positive and negative. If you put them in the wrong position, mainboard IC will definitely be destroyed. To avoid damaging the motherboard, exposed part of the wiring must be wraped well
B- Negative B+Positive
Size: 7.1x1.6cm / 2.80x0.63inch
Quantity: 1 PC
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you
Battery voltage: 3.7-4.2 lithium battery (not include)
Note: the battery must be in parallel rather than in series. Test voltage before installation. One bad battery will affect the whole group battery. Recognize the positive and negative. If you put them in the wrong position, mainboard IC will definitely be destroyed. To avoid damaging the motherboard, exposed part of the wiring must be wraped well
B- Negative B+Positive
Size: 7.1x1.6cm / 2.80x0.63inch
Quantity: 1 PC
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you
Package Included:
1 x 5V 2.1A Lithium Battery Power Bank Charger Module Charging Circuit PCB Board
1 x 5V 2.1A Lithium Battery Power Bank Charger Module Charging Circuit PCB Board
5V 2.1A 3USB
100% brand new and high quality.
Apply Battery Type: 18650 battery(not include)
Output Voltage: 5V 2.1A
Input Voltage: 5V 1A
Instructions: Level 4 Capacity indicator
Lighting: with LED lights
Rated Voltage: 3.7V (Suit for 3.2V-4.2V. The batteries are in parallel)
Specifications:
Material: Electronic components
Color: shown as pictures
Size: 62×18×8mm/2.44×0.71×0.31in
Quantity: 1 PC
Note:
1. Transition: 1cm=10mm=0.39inch
2. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 x 3-Port USB Circuit Board (The battery is not included)