This is a mini size submersible water pump. It's equipped with a brushless motor providing smooth and quiet operation than a non-brushless water pump.
Features:
Brushless pump, permanent rotor, maintenance-free.
Enameled wire coil and circuit board are by epoxy resin.
The coil adopts pure copper enameled wire, lower temperature rise and longer span.
Amphibious pump, you can use it in the water or out of water(follow the installation instruction).
5.5*2.1mm female DC12V for power input.
IP68 waterproof grade, totally submersible in the water.
Detachable design, providing convenience for cleaning work.
With a filter, avoiding blocking the inlet.
4 rubber suckers on the bottom, can adsorb on the smooth surface and reduce noise and .
Small size, high efficiency, low noise.
Suitable for aquarium, fountain, car cooling, water cooling system and circulation systems.
Note:
1. Please check the voltage and of the pump before on.
2. Please cut off the before you install/put in/take away the pump from the water; otherwise, the pump can't water due to the air in it.
3. It can be used in the water or other liquids(without particles and impurities); NOT for viscous and acid-base liquids.
4. DO NOT dry burn the pump, otherwise it would be damaged.
5. Switch on-off the repeatedly for several times to eliminate the air in the pump impeller and the .
6. When the pump is used in high temperature environment(100°C), it can only be installed with non-diving method.
Specifications:
Package List:
1 * DC12V Brushless Pump
1 * Filter
1 * User Manual(English)
H20629-2
Features:
Brushless pump, permanent rotor, maintenance-free.
Enameled wire coil and circuit board are by epoxy resin.
The coil adopts pure copper enameled wire, lower temperature rise and longer span.
Amphibious pump, you can use it in the water or out of water(follow the installation instruction).
5.5*2.1mm female DC12V for power input.
IP68 waterproof grade, totally submersible in the water.
Detachable design, providing convenience for cleaning work.
With a filter, avoiding blocking the inlet.
4 rubber suckers on the bottom, can adsorb on the smooth surface and reduce noise and .
Small size, high efficiency, low noise.
Suitable for aquarium, fountain, car cooling, water cooling system and circulation systems.
Note:
1. Please check the voltage and of the pump before on.
2. Please cut off the before you install/put in/take away the pump from the water; otherwise, the pump can't water due to the air in it.
3. It can be used in the water or other liquids(without particles and impurities); NOT for viscous and acid-base liquids.
4. DO NOT dry burn the pump, otherwise it would be damaged.
5. Switch on-off the repeatedly for several times to eliminate the air in the pump impeller and the .
6. When the pump is used in high temperature environment(100°C), it can only be installed with non-diving method.
Specifications:
| Model(Optional) | QR50C | QR50D |
| Max. | 6W | 10W |
| Max. Quantity | 300L/H | 400L/H |
| Max. Lift | 300cm / 9.84ft | 400cm / 13.12ft |
| Max. Current | 500mA | 830mA |
| Rated Voltage | DC12V | |
| Noise | Less than 35dB | Less than 37dB |
| Max. Temperature | 100°C | 60°C |
| Lack of Water | No | Yes |
| Outer Dia. of Inlet/ | 8.5mm / 0.33in | |
| Inner Dia. of Inlet/ | 6mm / 0.24in | |
| Waterproof Class | IP68 | |
| Material | PC + ABS | |
| Cable Length | 150cm / 4.92ft | |
| Product Size | 59.5 * 49 * 42mm / 2.34 * 1.9 * 1.65in | |
| Product Weight | 92g / 3.25oz | |
| Package Size | 6.5 * 6 * 5.4cm / 2.56 * 2.36 * 2.12in | |
| Package Weight | 104g / 3.68oz | |
Package List:
1 * DC12V Brushless Pump
1 * Filter
1 * User Manual(English)
H20629-2
