Made in the USA To the highest quality, don't be fooled by the competition that makes everything in China!
the Chinese have copied my products with the worst quality!
... take a moment and look carefully at the quality
(the photos speak for themselves)  see the comments of my 100% satisfied clients... More than 10 years in the
manufacture of these exhausts from Florida USA.

You must know this before you make your purchase!
-There is no painting in this exhaust, Rust can come out over time, "solution" you applies high heat paint.
-This Exhaust tip will change color due to the high heat generated by the engine.
-There is nothing inside, It will be very loud! But will increase performance!

Screw on any type of female 3/4 thread.

Type of material: Mild steel, Uncoated Steel.

What will you receive?
-Exhaust header 4 stage tailpipe.


We only ship to paypal confirmed address.

Florida residents pay 7% taxes.

Finding the Correct Pipe Thread Size

National Pipe Threads (NPT)

Pipe sizes do refer to physical dimensions, but the plumbing industry standard for the sizes of pipe is not always as straight-forward as measuring the pipe. Measuring the pipe will oftentimes mislead you into choosing the wrong pipe, so do take care. The "pipe thread size" as shown in column 3 of the table below is measured and based on the inside of the pipe. But, to actually determine the size of a pipe, the outside diameter of each pipe or fitting must be measured and compared to the table for size identification. For example, a 3/4" NPT pipe thread has an outside diameter of 1.050 inches. Each thread size has a defined number of threads per inch (TPI). The 3/4" NPT pipe thread has 14 threads per inch. Both the TPI (threads per inch) and OD (outside diameter) of the thread are required for positive identification of thread size because several sizes have the same TPI.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------