We are professional industrial&electronic Categorie manufacturers in China. We have been working in this field for almost 10 years!
Our products include all kits&welded products for Andruino, Raspberry Pi, or mini flights.
If you have any needs, pls contcact us for free, we will help you get all things you need.
Thank you !
Product View
Product Details
Feature
1. Using high-quality materials, the quality is guaranteed
2. Real-time synchronous feedback of remote output status and water level
3. It can run independently without WIFI, and realize the function of single-machine control of water level
4. The on-off of one output can be controlled remotely or manually on site (when the set water level value is not reached)
5. It can control drainage with high opening and low closing, or control water replenishment with low opening and high closing, or select time-limited control mode
6. Remote upper and lower water level alarm APP push function
7. APP can display the current water level, start water level, stop water level, upper and lower limit alarm water level
8. Two outputs, one water level control, one anti-dry function
9. The main account can share the device with others, and the device can only be added under one main account (note that the alarm can only be realized if the device and the mobile phone are both online. Without the network, it is like the mobile phone can’t make a call without a signal!)
2. Real-time synchronous feedback of remote output status and water level
3. It can run independently without WIFI, and realize the function of single-machine control of water level
4. The on-off of one output can be controlled remotely or manually on site (when the set water level value is not reached)
5. It can control drainage with high opening and low closing, or control water replenishment with low opening and high closing, or select time-limited control mode
6. Remote upper and lower water level alarm APP push function
7. APP can display the current water level, start water level, stop water level, upper and lower limit alarm water level
8. Two outputs, one water level control, one anti-dry function
9. The main account can share the device with others, and the device can only be added under one main account (note that the alarm can only be realized if the device and the mobile phone are both online. Without the network, it is like the mobile phone can’t make a call without a signal!)
Specification
Model: YF-S201
Interface size: 4 points (G1/2)
Operating voltage range: DC5 ~ 15V
Inner/Outer Diameter: 10.9mm/20mm
Thread length: 14.5mm12.5mm
Material: Nylon
Water pressure resistance: ≤1.75MPa
Output pulse high level: >DC4.7V (input voltage DC5V)
Output pulse low level: <DC0.5V (input voltage DC5V)
Insulation resistance: >100MQ
Flow range: 1～30L\MIN
Airtightness: Close each hole, add 1.7Mpa water pressure test for 1 minute without leakage and deformation
Flow pulse characteristics: F= (7.5*Q) error≤3%
Appearance size: 89*55*44mm
Installation method and size: standard 35MM rail installation
Working power and power consumption: AC220V; <2W
Water level display: five-level water level display: 0%, 25%, 50%, 75%, 100%
Water level control range: full water level: 25%, 50%, 75%, 100% make-up water level: 25%, 50%, 75%, 100%
Time limit range: 0-720 minutes, need to be set on the APP, step by 5 minutes to set
Relay life: on and off 100,000 times
Operating environment: -10℃~50℃
Wireless standard: WIFI2.4GHZ B/G/N
Parameter memory: long-term memory of setting parameters when power off, can run offline
Model: YF-S201
Interface size: 4 points (G1/2)
Operating voltage range: DC5 ~ 15V
Inner/Outer Diameter: 10.9mm/20mm
Thread length: 14.5mm12.5mm
Material: Nylon
Water pressure resistance: ≤1.75MPa
Output pulse high level: >DC4.7V (input voltage DC5V)
Output pulse low level: <DC0.5V (input voltage DC5V)
Insulation resistance: >100MQ
Flow range: 1～30L\MIN
Airtightness: Close each hole, add 1.7Mpa water pressure test for 1 minute without leakage and deformation
Flow pulse characteristics: F= (7.5*Q) error≤3%
Appearance size: 89*55*44mm
Installation method and size: standard 35MM rail installation
Working power and power consumption: AC220V; <2W
Water level display: five-level water level display: 0%, 25%, 50%, 75%, 100%
Water level control range: full water level: 25%, 50%, 75%, 100% make-up water level: 25%, 50%, 75%, 100%
Time limit range: 0-720 minutes, need to be set on the APP, step by 5 minutes to set
Relay life: on and off 100,000 times
Operating environment: -10℃~50℃
Wireless standard: WIFI2.4GHZ B/G/N
Parameter memory: long-term memory of setting parameters when power off, can run offline
Configuration process
Installation preparation:
Search for "Tuya Smart" and install the APP.
After installing the APP, please use your mobile phone or email to register an account.
Note that please use the system default font, otherwise it will display confusion
Installation preparation:
Search for "Tuya Smart" and install the APP.
After installing the APP, please use your mobile phone or email to register an account.
Note that please use the system default font, otherwise it will display confusion
Mobile APP adding device process
1. Connect the wires according to the wiring diagram. After the first power-on, wait for a few seconds, the indicator light 1 flashes quickly, and the device enters the WIFI configuration mode by default.
Note: If the device has been added to the APP and needs to be reconfigured, press and hold the configuration button in the working state until the indicator lights 1 and 2 flash at the same time, and then release the button. At this time, the device enters the smart configuration mode. The router is not compatible, at this time, you can press and hold the configuration button again, the indicator lights 1 and 2 flash slowly, and then enter the compatibility mode configuration.
2. Open the APP, and click the "+" icon in the upper right corner to select any device.
3. Click "Confirm the indicator light is flashing quickly" on the APP
4. Prompt to select a wifi that can access the Internet normally and enter the password. After confirming the password and entering it correctly, click "OK".
4.1 The device uses 2.4G wifi communication protocol, and does not support 5G network for the time being.
4.2 If the network is set to hide or filter the MAC address, please ask the network administrator to enter the background to modify the settings, and then add the device.
5. The APP automatically starts to configure, and the device is added successfully when the progress bar is reached.
6. After adding successfully, you can rename the device.
Note: After the addition is successful, the device will be automatically deleted from the current APP if it is reconfigured.
1. Connect the wires according to the wiring diagram. After the first power-on, wait for a few seconds, the indicator light 1 flashes quickly, and the device enters the WIFI configuration mode by default.
Note: If the device has been added to the APP and needs to be reconfigured, press and hold the configuration button in the working state until the indicator lights 1 and 2 flash at the same time, and then release the button. At this time, the device enters the smart configuration mode. The router is not compatible, at this time, you can press and hold the configuration button again, the indicator lights 1 and 2 flash slowly, and then enter the compatibility mode configuration.
2. Open the APP, and click the "+" icon in the upper right corner to select any device.
3. Click "Confirm the indicator light is flashing quickly" on the APP
4. Prompt to select a wifi that can access the Internet normally and enter the password. After confirming the password and entering it correctly, click "OK".
4.1 The device uses 2.4G wifi communication protocol, and does not support 5G network for the time being.
4.2 If the network is set to hide or filter the MAC address, please ask the network administrator to enter the background to modify the settings, and then add the device.
5. The APP automatically starts to configure, and the device is added successfully when the progress bar is reached.
6. After adding successfully, you can rename the device.
Note: After the addition is successful, the device will be automatically deleted from the current APP if it is reconfigured.
Package List
1 x Water Level Controller
5 x Water Level Electrodes
1 x Water Level Controller
5 x Water Level Electrodes
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.