|
This is a PCI-e x4 slot card
Catch up to speed with modern devices with this PCI-Express 2.0 to USB 3.0 and SATA III Combo Card (up to 6Gbps = 550mbps transfer speeds).
Has both Etron EJ168A and ASMedia ASM1061 chipset.
Designed with 2 USB 3.0 Ports and 2 internal SATA III ports in one PCI-Express card with a Unique HDD activity LED indicator circuit design!
Specifications:
PCI-E Version:V2.0
(To achieve USB 3.0 high speed performance, a V2.0 slot is required)
PCI-E Slot Length: x4
NOTE: x4 cards cannot be inserted into a x1 slot.
x4 slot is longer slot than the regular x1 slot.
Usually x4 slots can be found on newer motherboards.
However, this x4 card can be installed into a x16 graphic card slot.***
Ports:
2 USB 3.0 Ports
2 Internal SATA-3 Ports
Connector: Floppy 4-pin Power Connector
Chipset:
Etron EJ168a &
ASMedia ASM1061
PCI-Express 2.0 Interface
Backwards Compatible to PCI-e 1.0a with Data Transfer Rate up to 2.5Gbps
Supports Standard and Low-profile Desktop Computers
USB 3.0 Interface:
Compliant with Universal Serial Bus 3.0 Specification Revision 1.0
USB 3.0 Super-speed (5Gbps) Host Port, Backward Compatible with USB 2.0
High-speed (480Mbps) Interface
Full-speed (12Mbps) Interface
Low-speed (1.5Mbps) Interface
Supports all USB Compliant Data Transfer Types (Control/Bulk/Interrupt/Isochronous)
Supports all USB Compliant Peripherals (e.g. Keyboard, Mouse, Monitor, Joystick, etc.)
Full Support of Real Time Dynamic Insertion and Removal of USB Devices
Supports Battery Charging 1.2 and Popular Apple Devices Via USB
Internal HDD Power Connector for Supplying Extra +5V Power to the USB Ports
SATA-III Interface:
Compliant with Serial-ATA Specification 3.0
Supports Communication Speed of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Compatible with SATA-III (6Gbps), SATA-II (3Gbps), SATA-I (1.5Gbps) Hard Drives and SDD's
Supports Gen1m and Gen2m SATA PHY
Supports Native Command Queue (NCQ)
Supports SATA Port Multiplier
Supports SATA Port Hot-plug
Unique Hard Drive Activity LED Indicator Circuit Design:
The LED Blinks When There is Read/Write Activity on Any One of the Hard Drives Connected to the Motherboard or to This Add-on Card.
Notes: Card is bootable but it requires a re-install of the OS/repair of OS; does not need floppy power feed for SATA ports to function.
Hardware Requirement:
Motherboard with one Suitable Version 2.0 PCI-e x4 Slot
(If the card is installed on a version 1.0 PCI-e slot, the performance will be downgraded to USB 2.0 speed)
|
