CLM Pro high quality fuselage set #121 with completed tail suitable for wingspan up to 3 meters / 119".
Set contains glass fabric pod, carbon tailboom, V-mount and completed tail.
Set weights 150 grams / 5.29 oz.
Carbon boom is 700 mm / 27.55" long and weights 30g 1.05 oz.
Carbon
tail boom is made from several carbon types. Materials are
strategically positioned so the boom is of its maximum strength and
minimum weight.
Carbon V-Mount has ID of 13.7mm / 0.54" and weights 5.5grams / 0.194 oz.
You get few different bolts with it.
The pod is
completely made of composites (multiple types of materials). It has
been made of fine glass fabric material, and has carbon fiber
reinforcements on strategic spots, giving it additional strength to
endure heavier straining. It is strong enough to withstand even hardcore
landings and other forces. The part where the tow hook is, the pylon
are also reinforced, just like the top of the nose, so it can be landed
roughly. The nose and front part of the pod are reinforced so it can be
landed roughly and used for pike-landing on competitions.
The
canopy is designed in a way that there is enough space to easily
manipulate all the components in the pod, allowing the battery to be
inserted and connected easily, improving usability on the field. The
edges around the canopy are also reinforced with carbon.
It is supplied with a removable carbon canopy.
Pylon is for AG series airfoil. Pylon is designed so it doesn't intersect with flaps when they are lowered to their maximum.
Pylon is 127 mm / 5" long, so wings up to 195 mm / 7.67" depth and even more can be mounted. Dihedral is 2° on each side.
This pod is suitable for wingspans of up to 3 meters / 119". It is ideal for home builders, as it can be used as a replacement pod for other projects, too.
NOTE: Pod is designed so that you can make an electric version. Since the nose is quite reinforced, it is only necessary to cut the nose on specified length, put firewall and you get a diameter of 32 mm for a spinner.
NOTE2: If you require a pod version which is lighter or much stronger than the standard one, simply contact us and we can make a custom one for you. This also goes for the selection of materials.
Tail:
The tail is projected and constructed so it looks very elegant and has excellent flight characteristics.
The
tail is made as a constructin of laser cut ribs covered with carbon cap
strips and additional carbon reinforcements which gives it great
strength. It is also made with carbon main spar and trailing edge.
Vertical stabilizer is made the same way and it already has a built in kevlar hinge.
Complete tail is covered with Oracover - Light Oralight foil. You choose the tail foil color combination.
The
tail is also prepared to be mounted on our V-Mount. It has a slot and
the V-Mount simply slides into it and you only need to fasten them
together with a screw.
Tail specifications:
Horizontal stabilizer:
Width: 500 mm
Depth: 104 mm
Tip depth: 95 mm
Weight: 17g
Area: 4.97dm2
Vertical stabilizer:
Height: 260 mm
Width: 145 / 80 mm
Weight: 17g
Area: 2.92dm2
Pod Specifications |
|
Length |
573 mm / 22.55" |
Wing depth |
195 mm / 7.68" |
Profile |
AG Series |
Boom diameter |
24 mm ID / 0.945" |
Dihedral angle |
2° on each side |
Weight |
85 g / 2.99 oz |
Spinner |
32 mm / 1.26" |
Carbon Tailboom |
|
Length |
700 mm / 27.55" |
Wide End |
24 mm ID / 0.945" |
Narrow End |
12 mm OD / 0.47" |
Weight |
30 g / 1.05 oz |
Wall thickness |
0.6 mm / 0.023" |
V-Mount |
|
Inside diameter |
13.7 mm / 0.539" |
Weight |
5.5 g / 0.19 oz |
Height of the tailplane mounting plate |
50 mm / 1.96 |
Tail set: |
|
Elevator / horizontal stabilizer: |
17g / 0.59oz |
Rudder / vertical stabilizer |
17g / 0.59oz |