Please contact us for details about this or for any other questions: sales at ciscoland.net


This is a Server-based Home Lab for the recently revised CCIE Security v6.1 Lab Exam.

Although it's based on INE's recommendations (Inter Network Expert), this CCIE Sec. Lab can be used with any other Lab Topology.

The URL shown below contains the new set of requirements for the upcoming version (v6.1) of the CCIE Sec. Lab:

https://www.mediafire.com/folder/x082154dgoboz/


This Lab is built using a Dell R620 Server w/ 128GB RAM (384GB Max.) + 1TB SSD HD with VMware ESXi 6.7

It includes 2 x Octa-Core Processors (Xeon E5-2650 or higher) with 32 vCPU's

This Server is running VMware ESXi 6.7 Enterprise Version with a Permanent Enterprise License.


These are the main technical specifications of this CCIE Virtual Lab:

- 2 x Octa-Core Processors - Xeon E5-2650 or higher
- 4 x Gigabit Ethernet Interfaces
- 128GB RAM (384GB Max)
- 1TB SSD Hard Drive
- VMware ESXi Enterprise 6.7 (Permanent License included) 
- 10 Instances of the Cisco CSR-1000v Virtual Router with IOS XE version 17.3.2
- 21 Security Virtual Appliances (ISEv, WSAv, ESAv, FTDv, FMCv, ASAv, WLCv, etc.)

Important Note: This item requires a Processing Time of 3-4 business days. Therefore, it could take up to 5 days to actually ship this item.

Please also notice that a Monitor is not included. You'll need a Monitor and a Keyboard to operate this Server.


CCIE Sec. v6.1 Lab Topology:

The Topology for CCIE Security Lab v6.1 is actually very similar to that of the previous version (v6.0)

However, we have made some changes to the original Topology to incorporate the new Requirements

The Topology includes the following main components:

- 2 x Cisco ISEv (Identity Services Engine) version 3.0
- 2 x Cisco ISEv (Identity Services Engine) version 3.1 (two versions of ISE included)
- 2 x Cisco WSAv (Web Security Appliance) version 11.7.1.006
- 2 x Cisco ESAv (Email Security Appliance) version 11.1.0.069
- 2 x Cisco FTDv (Firepower Threat Defense) version 6.2.0-363
- 2 x Cisco FMCv (Firepower Mgmt. Center)  version 6.2.1-342
- 2 x Cisco FTDv (Firepower Threat Defense) version 7.0.1-84 (two versions of FTD included)
- 2 x Cisco FMCv (Firepower Mgmt. Center)  version 7.2.4-169 (two versions of FMC included)
- 4 x Cisco ASAv (Adaptive Security Appliances) version 9.10.1
- 1 x Cisco WLCv (Wireless LAN Controller) version 8.10.112
- 2 x PCs/Test Stations (Windows 2019 Servers)
- 11 x Cisco CSR1000v (Cloud Services Router) version 17.3.2
- Routers included: CSR1 – CSR10 + Default Gateway (DG)

All these Virtual Devices are pre-installed and pre-configured in the Server.

The original installation Software is also included (*)


With this Virtual Lab you can avoid paying Lab rental fees and will have full 24/7 access right at home!

 
Server Management:

Although you could Manage the Server with a single Management Station (PC or Laptop), it is recommended to have 2 separate PC's for Management purposes.

PC-1 is the standard Client-PC that all Servers need and it's also used for Out-of-Band Management.

PC-2 is the In-band Management PC.  It's used to connect to the Management Interface of each Virtual Appliance.
 

Physical Topology:

Please notice that a full CCIE Security Lab based on INE's Topology requires some Physical Devices.

The Cisco website provides a complete list of Software and Equipment requirements for the CCIE Security (v6.1) Lab Exam:

learningcontent.cisco.com/documents/marketing/exam-topics/CCIE_Security_v6.1_equip_and_SW_list.pdf

Therefore, some of the most advanced Lab Exercises require the use of some Physical Appliances.

For information about all the Requirements, please check out the following URL:

https://www.mediafire.com/folder/0xvu1300jufq4/


Upgrade Options:

RAM can be upgraded from 128GB to 256GB or 384GB

SSD Drive can be upgraded from 1TB to 2TB or even 4TB

We can also combine other of our Products (other Labs) in the same physical Box

Please contact us if you would like to add any of these upgrades: Sales at ciscoland.net


Virtual Device Licenses:

Most Virtual Appliances come with a Trial/Demo License.

In most cases this Demo License can be reset by re-installing the Virtual Appliances. 

The original installation Software is provided for that purpose.

A few Appliances and the ESXi Server itself do have a Permanent License though!

This is a summary of the Licenses for each Virtual Appliance:

- ISEv: 90-Day Trial License (it must be re-installed after 90 days)
- WLCv: 90-Day Trial License (it must be re-installed after 90 days)
- FTDv: 90-Day Trial License (it must be re-installed after 90 days)
- FMCv: 90-Day Trial License (it must be re-installed after 90 days)
- WSAv: 30-Day Trial License (it needs a new License after Trial Period)
- ESAv: 30-Day Trial License (it needs a new License after Trial Period)

- ESXi Server: Permanent Enterprise Version License
- Test Stations (Windows 2019 Server): 180-Day Trial License
- ASAv: Lab Edition Mode (No License), but still fully functional. Data Rate limited to 100Kbps
- CSR1000v: Lab Edition Mode (No License), but fully functional. Data Rate limited to 2.5Mbps

Note about CSR1000v Licenses

- CSR1000v Routers are configured in Lab Edition Mode (No License), but they are still fully functional.
- While in Lab Mode the Router is fully functional with an AX License with IPBase + APPX + Security functions
- The Data Rate in Lab Mode is limited to 2.5Mbps, which is enough for a Lab environment.

Note about WSAv & ESAv Licenses

- Demo Licenses for the WSAv & ESAv Appliances last for only 30 days. 
- After this 30-day period you'll need a new Demo License, which can be obtained from Cisco.
- You'll need to contact Cisco directly to obtain these Licenses.

Note about the NGIPSv Virtual Appliance

- There are no Trail/Demo Licenses available for the NGIPSv Virtual Appliance
- However, for almost all practical purposes, FTDv replaces NGIPSv!
- An FTDv Appliance is considered to be an NGIPSv with a ASAv included
- So in a way, FTDv actually provides more functions than NGIPSv
- For that reason, this Lab doesn't include an NGIPSv Virtual Appliance!

Warranty:

Server is fully tested and therefore it's guaranteed to work! 

If you experience any problems, we'll replace it.  However, that's very unlikely to happen.

If there are no issues with the system but you still decide to return, all Returns are subject to a 15% Re-stocking fee.


We are PWR Sellers with a 100% positive Feedback Record  (please check out our Feedback Record)

We've been providing Cisco Training Kits for years with hundreds of very satisfied customers.

Therefore, you can buy with confidence from us.

Please notice that due to the VERY complex nature of this item we need 3-4 days for processing (configuration and testing)

Typical Transit time is 2-5 business days via FedEx Ground (it depends on where you live)


Shipping to Alaska, Hawaii or to International destinations is also available. 

But you need to ask for a shipping quote for any Orders outside the Continental USA.


For ALL questions related to this or other items, please contact us: sales at ciscoland.net

Ground shipping fee applies to the Continental USA (lower 48 states) only.

Thank you for looking!