EIBACH SPORTLINE LOWERING SPRINGS and
ROADNUTZ LEAF SPRING SHACKLE KIT /
LOWERING BRACKETS
Sportline Extra Low Performance Springs for the front. These are about the best quality springs money can buy for that ultra low stance.
To achieve lowering on the rear of your Caddy the rear axle axle needs
to be mounted on top of the leaf springs, sometimes called 'axle flip'.
This RoadNutz shackle kit is designed to do this and secure the rear axle in this
new position whilst also giving the option to set the lowering amount using the holes in the shackle plates.
EIBACH SPORTLINE LOWERING SPRINGS and ROADNUTZ SHACKLE KIT / LEAF SPRING LOWERING BRACKETS TO FIT:
VOLKSWAGEN Caddy Life - 1.6 TDI / 1.9 TDI / 2.0 SDI / 2.0 TDI including 4Motion versions. ONLY Models with Single Rear Leaf Springs.
Type: 2K, Year(s): 2004-2020
Front Lowering: 60mm
Rear Lowering Range: 50-85mm
Kit Consists of:
2 x Front Springs
4 x Leaf-Spring Hangers
2 x Axle Clamp Kits with nuts/bolts
Part Number: E20-85-019-02-20 / RN-VW-CADDY2K
Notes: ONLY Models with Single Rear Leaf Springs. We recommend that this kit is only installed by a qualified vehicle
mechanic preferably one with experience of using this type of lowering
kit.
Use manufacturers settings when checking and adjusting alignment.
If unsure of fitment Please Send Message with either UK Registration or FULL VIN Number.
Read ALL of the details in the ENTIRE LISTING CAREFULLY not just the title and/or Ebay compatibility chart as we're limited in what we can detail here. IT IS YOUR RESPONSIBILITY to be sure of correct fit - contact us if unsure. Mistakes happen from time to time BUT any costs incurred relating to wrongly ordered items will be customers' responsibility. Wrongly ordered parts must be returned new, unused and complete - If you fit them, you own them.
You may get differences in ride height to that quoted due to many factors for example : Car already has after-market springs fitted, or has factory fitted sports suspension. Different equipment levels between models or Springs have sagged due to wear and tear. Your purchased springs may need time to settle to reflect the final ride height.
We supply mainly non-standard items that are often not a straight forward DIY fit. In some cases, modifications or adaptations may be required to achieve an acceptable fit. We therefore recommend that parts we supply should be fitted by a qualified mechanic.
Finally please “Don’t” book your car into a garage before your goods arrive, we will not be held accountable for any financial losses - DELIVERY TIMES ARE ESTIMATES ONLY.
