Description:

Features:
1: Simple and dexterous, with various forms to meet any management needs
2: Even after installation, the plastic tube can be turned at will
3: The release ring adopts an elliptical design, which makes disassembly easier.
4: All vascular threads are coated with better sealing performance
5: The joints have hexagonal holes, which is more convenient to install in narrow places.
Model description:
PU-8: PU stands for plastic straight through, 8 stands for outer diameter 8mm air pipe
Product Size:
PU6: D1: 6MM B: 35.5
PU8: D1: 8MM B: 38
PU10: D1: 10MM B: 47

Instructions for use:
1: The dust and dirt in the air pipe must be cleaned before use. Otherwise, dust and debris may enter the pipe, resulting in reduced service life or leakage.
2: When connecting the air pipe to the pipe joint, the end face of the air pipe must be cut into a right angle plane, and then the air pipe connection is performed;
3: When connecting the trachea, insert the trachea into the tube interface, and insert it as far as possible inside, and push it to the end of the trachea through the sealing ring until the end of the interface, otherwise it may lead to leakage;
4: When connecting the air pipe, the air pipe must be pulled to check whether it will loosen to avoid leakage;
5: When dismantling the pipe, the residual air pressure must be 0: evenly press the casing evenly to make the circlip fully open and then disassemble. Otherwise, the air pipe is not easy to pull out, and the air pipe may be deformed and scratched, resulting in leakage;
6: The allowable tolerance of the outer diameter of the trachea is 0.1 mm of the nominal diameter;
7: After connecting the air pipe, it should not be excessively stretched and deformed, which may affect the service life.
8: Use the appropriate tool when connecting to avoid deformation
9: Pay attention to the strength when connecting

Packing list:
> 6mm connector 10pcs
> 8mm connector 10pcs
> 10mm connector 10pcs