Description
Features:
-
60W high rf power output. Despite its size, the TM-271A can provide an
impressive 60 watts of RF power, with a choice of High/Low output.
-
US MIL-STD 810 C/D/E/F. Built tough to take rough treatment in its
stride, the TM-271A meets the strict U.S. Department of Defense MIL-STD
810 C, D, E and the latest F environmental standards for vibration and
shock.
- Alphanumeric LCD and illuminated keypad. Capable of
displaying up to 6 large alphanumeric characters, the positive-type
green LCD display comes with a 32-step brightness control to suit all
driving conditions. Also, the front panel and microphone keypads are
both illuminated for ease of use. Note that keys for only the 5 most
frequently used functions are arranged on the front panel for simplicity
(other functions can be quickly accessed via menu).
- DTMF microphone. The TM-271A is supplied with a DTMF microphone as standard.
- High-quality front speaker. The large oval (2.28" x 1.38") speaker mounted in the front panel provides excellent clarity.
-
200 memory channels plus 1 call-channel. Each of the 200 memory
channels can be used to store, transmit, and receive frequencies
independently. Additionally, memory data can be edited and stored on
your computer using MCP-1A Memory Control software.
- Memory name
function. At-a-glance identification of 100 memory channels is possible
with up to 6 alphanumeric characters per channel. Up to 200 channels are
available if the memory name function is not used.
- Multiple scan
functions. For maximum versatility, the TM-271A offers several scan
functions, including VFO (band) scan, all memory scan, program scan,
memory group scan (group scan), call scan, tone/CTCSS scan, DCS scan and
priority scan, which checks a priority channel every 3 seconds. TO
(Time-operated), CO (carrier-operated) and seek scan resume modes are
also provided.
- CTCSS & DCS encoder/decoder. The built-in CTCSS
and DCS encoder/decoder enables operation of the 42 CTCSS subtone
frequencies and 104 DCS subtone codes.
- High frequency stability.
Thanks to the built-in TCXO, frequency stability is ±2.5ppm, while
frequency drift is less than ±365Hz at -20°C to 60°C.
Other Features:
- Power-on Message
- Wide/Narrow Deviation Selection (per channel)
- 1750Hz Tone Burst
- Automatic Simplex Checker
- Reverse Repeater Checker
- Automatic Repeater Offset
- Beep On/Off
- Automatic Power Off
- Time Out Timer
- Channel Display Mode
- Busy Channel Lock-out
- Memory Channel Lock-out
- MR-shift
- Direct Frequency Enter
- Key Lock
Specifications:
General:
- Frequency Range: TX: 144-148MHz; RX: 136-174MHz
- Mode: F3E (FM)
- Power Requirement: 13.8V DC ±15%, negative ground
- Current Drain Transmit: Less than 13.0A (High), less than 8.0 A (Low)
- Current Drain Receive: Less than 1.0 A
- Operation Temperature Range: -20℃ to 60℃
- Antenna Impedance: 50 ohms
- Microphone Impedance: 600 ohms
- Frequency Tolerance: ±2.5 ppm (-20℃ to 60℃)
- Dimensions (W x H x D) (Projections excluded): 6.30" x 1.69" x 5.39" (160 x 43 x 137mm)
- Dimensions (W x H x D) (Projections included): 6.33" x 1.69" x 6.65" (161 x 43 x 169mm)
- Weight: 2.6lbs (1.2 kg)
Transmitter:
- RF Output Power (approx.): HI: 60W; LO: 25W
- Modulation: Reactance modulation
- Maximum Frequency Deviation: ±5 kHz
- Modulation Distortion: Less than 3% (300MHz~3KHz)
Receiver:
- Circuitry: Double Conversion Superheterodyne
- Intermediate Frequency: 1st IF: 49.95MHz; 2nd IF: 450kHz
- Sensitivity (12dB SINAD): Less than 0.18 μV (Narrow: less than 0.22 μV)
- Squelch Sensitivity: Less than 0.1μV
- Selectivity: -6dB: More than 12 kHz (Narrow: more than 10kHz); -60dB: Less than 30 kHz (Narrow: less than 24kHz)
- Audio Output Power: More than 2W (5% distortion)
Package Included:
- 1 x Mobile Radio
- 1 x Set of Bracket For Mobile Radio
- 1 x Handheld Mic
- 1 x Power Cord
- 1 x User Manual
- 1 x Bag of Screws
TM-471A 400-490MHz 40W Mobile Radio UHF FM Transceiver Base Station Distance Over 10KM For KENWOOD
Features:
- 40W high rf power output
- US MIL-STD 810 C/D/E/F & Europe's e-mark
- Alphanumeric LCD and illuminated keypad
- DTMF microphone
- High-quality front speaker
- Multiple scan functions
- 200 memory channels plus 1 call-channel
- Memory name function
- CTCSS & DCS encoder/decoder
- High frequency stability
- Busy Channel Lock-Out
- TOT (Time Out Timer)
- PC Programmable + keypad/manual programmable
- High/Low power switchable
Specifications:
General:
- Model: TM-471A
- Frequency range: 400-490MHz
- Mode: F3E (FM)
- Antenna Impedance: 50 ohm
- Operating Temperature: -25°C to 60°C
- Power Voltage: 13.8V DC ±15% (11.7-15.8V)
- Dimensions: 160 x 43 x 137mm/6.3 x 1.7 x 5.4"
- Weight: 1.2Kg/2.6 lb
Transmitter:
- Power output: High 40W, Low 25W
- Frequency Stability: ±2.5ppm
- Spurious Emissions: better than -60dB
- FM noise: ≤-40dB
- Audio distortion: ≤3%
- Max. Frequency Deviation: ≤±5KHz (wide); ≤±2.5KHz (narrow)
- Microphone Impedance: 600 ohms
Receiver:
- Frequency Stability: ±2.5ppm
- Sensitivity: Better than 0.18uV (wide)/0.22uV (narrow)
- Modulated bandwidth: ≥ ±7KHz (wide)/3.5Khz (narrow)
- Adjacent channel selectivity: ≥ 60dB
- Intermodulation Rejection: ≥65dB
- Spurious response rejection: ≥65dB
- Audio output power: 2W or Above
- Audio output Impedance: 8 ohms
Package Included:
- 1 x Mobile Radio
- 1 x Set of Bracket For Mobile Radio
- 1 x Handheld Mic
- 1 x Power Cord
- 1 x User Manual
- 1 x Bag of Screws Accessories
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
-
For remote regions, we will charge your extra shipping costs. Usually
it cost about 35USD-50USD. We will contact you after your payment.
Thanks for your understanding.
Return Terms
1.
If you receive defective item, please kindly notify us within 14 days.
We will guide you the returning instruction for replacement or refund.
2.
If you purchased in improper condition, please NOTE that the sipping
and handling fee will not be refund, all return shipping fee should paid
by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1.
Import duties, taxes, and charges are not included in the item price or
postage cost. These charges are the buyer's responsibility.
2.
Avoiding some unnecessary trouble, please check with your country's
customs office to inform us what we should declare its value before
shipping.
Feedback
1.
If you are dissatisfied for any reason, please don't be quick to leave
us neutral or negative feedback. We work hard to make sure EVERY
CUSTOMER 100% SATISFIED and resolve any problem for you and always leave
positive feedback to all our customers.
2. If you are satisfied with
the product you received, please kindly leave us a positive feedback
and 5 star DSR. If there is any problem of your order, please feel free
to contact us firstly, we are responsible and credible seller, will
follow it for you asap.