SDS Drill Bit Bits MesserSchmith Concrete Brick Cement  Cross Head End.

A  heat toughened drill designed for drilling holes in high-density materials. 

Thanks to using a cemented carbide tip, the cutting properties are maintained for a long time. 

According to DIN 8035 standard.

• made of special steel with DIN - A322/G5140 specification, resistant to bending, abrasion, and twisting

• YG8 cemented carbide tip

• manganese in the composition increases the impact strength and hardness

• chrome provides greater resistance to abrasion

• silicon has a positive effect on elasticity, hardness, and the strength of steel

• cemented  carbide tip

• work with low vibrations

• Four cutting edges prevent the drill bit from jamming in reinforcement

• quadruple helix efficiently and quickly discharges the spoil from the hole

• long service life

DRILL BITS SET SDS PLUS  5PCS   

SQWSDS-M-01

Size:

5mm x 110mm

6mm x 110mm

6mm x 160mm

8mm x 160mm

10mm x 160mm

A heat toughened drill designed for drilling holes in high-density materials. 

Thanks to the use of tungsten carbide blades tip, cutting properties are maintained for a long time. 

According to DIN 8035 standard. 

• made of special steel with DIN specification - A322 / G5140 resistant to bending, abrasion, and twisting 

• YG8 cemented carbide 

• manganese in the composition increases the impact strength and hardness 

• chrome provides greater resistance to abrasion 

• silicon has a positive effect on elasticity, hardness and strength of steel 

• tungsten carbide tip working with low vibrations 

• four cutting edges prevent jamming of the drill bit in reinforcement 

• quadruple helix efficiently and quickly discharging the spoil from the hole 

• long service life

DRILL BITS SET SDS PLUS  6PCS   

SQWSDS-M-02

Size:

5mm x 110mm

6mm x 110mm

8mm x 110mm

6mm x 160mm

8mm x 160mm

10mm x 160mm

A thermally improved drill designed for drilling holes in high-density materials. 

Thanks to the use of tungsten carbide blades tip cutting properties are maintained for a long time.

 According to DIN 8035. 

• made of special steel with DIN-A322/ G5140 resistant to bending, abrasion, and twisting 

• YG8 cemented carbide 

• manganese in the composition increases the impact strength and hardness 

• chrome provides greater resistance to abrasion 

• silicon has a positive effect on elasticity, hardness, and the strength of stee

• a cemented carbide tip work with low vibrations 

• four cutting edges prevent jamming drill bits in reinforcement 

• quadruple helix efficiently and quickly discharging the spoil from the hole 

• long service life