Features:

 

【Remote Control】Supports Remote Control the Parameters of Each Flash Group

When YN685 used as slave unit, it supports remote control of the flash mode, flash output and focal length of each flash group through YN622N series transceiver or YN660/YN560IV/YN560-TX.

 

【Extended Display】Used as YN622N II control panel and LCD panel

The YN685 can be set to 622 Ext.LCD trigger mode and then installed on the YN622N II acting as the control panel and LCD panel, makes the operation of the trigger more convenient.

 

【HSS】Supports High-speed Synchronization

When the HSS function is enabled, this speedlite can be used at all shutter speed,the maximum sync speed can reach 1/8000s.Note: The function need the support by the camera and transceiver.

 

【High Guide Number】GN60@ISO100,200mm

The YN685 is 2.4GHz wireless high guide number speedlite, supports TTL、M、Multi mode.

 

【Upgrade】Supports Firmware Upgrade

Users can log in YONGNUO official website to download the latest firmware , to upgrade the speedlite via YN622N II, improve the performance of the product timely.

 

【Theme】Two display themes are designed for YN685

YN685 supports numeric theme and classic theme , you can choose the one that is suitable for you.

 

【Charging Recycle】Ultra-fast Charging Recycle System, Supports External Power Supply

It just take about 2 seconds at full output. Even if not use the brand new batteries, it just takes 3~5 seconds ultra-fast time to recycle; Besides, you can also use the external power supply to meet your higher requirement.

 

【Zooming】 Supports Auto and Manual Zooming

Supports auto and manual zooming, the flash coverage can be changed between 20~200mm.

 

【Sound Prompt】 Specific Sound Prompt System

When the sound prompt system is enabled, the speedlite can prompt its working condition, allows you to focus on creative process. Note: the sound prompt can be turned on/off.

Supports Custom Settings (Fn.) and Auto Save Settings

Equipped with LCD display screen and standard PC sync interface  

 

Specification:

 

Guide No.	60meters (ISO 100, 200mm)
Flash mode	i-TTL,M, MULTI
Trigger mode	set-top,622 Ext. LCD,622 R. Slave, 622 M. Slave, 603 Slave
Wireless triggering distance	20~25m indoor, 10~15m outdoor
Circuit design	Insulated Gate Bipolar Transistor( IGBT)
Zoom range	AUTO, 20,24,28,35,50,70,80,105,135 200mm
Vertical rotation angle	-7~90 degrees
Horizontal rotation angle	0~360 degrees
Power supply	4×AAsize batteries (Alkaline or Ni-MH are usable)
Lighting times	100~1500 times (AA alkaline cell used)
Recycle time	Approx 2s (AA alkaline cell used)
Color temperature	5600k
Flash time	1/200s~1/20000s
Flash control	8 levels of output control (1/128~1/1), 29 levels of fine tuning
External interface	hot shoe, PC port and eternal power interface
Wireless triggering distance	100m
Additional features	High-speed sync, second-curtain sync, FEC, FEB, FEV, the electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overheat protection, custom function setting
Dimensions	67×77×210mm (Extended state)
Net weight	426g

 

Compatible with:

1) Hot shoe mode
Nikon Camera  D700, D300s, D300, D200, D90, D80 

D4, D3x, D3s, D3, D2x, D800E, D800, D750,D700, D600, D300s, D300, D200, 

D7200, D7100, D7000, D90, D80, D5300,D5200, D5100, D5000, D3300,D3200,D3100, D3000, 

D60, D40, D40x

1) Wireless Manual ( RF-603 / RF-603 II mode ) System
YN622N, YN622N II, YN622N-TX, YN660, YN560IV, YN560-TX, RF605, RF603II and RF603 respectively
ALL DSLR Standard Hot shoe Camera

 

 

Functions:

LCD screen display, multi-buttons quick operation.

The firmware can be upgraded through the USB interface.

Support wireless shutter release function.

The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately.

Equipped with the AF focus assist light (can be disabled).

Grouping flash mode: i-TTL/Manual flash/Super sync.

Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode.

The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately.

Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s.

Support exposure compensation, flash value lock function(FVL).

Support simulate (modeling) flash, red-eye reduction flash.

Support the flash zooming (auto).

Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows.

Settings saved automatically.

The flash sync signal can be input through the PC port.

Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body).

(The above functions need to be used with the YN-622N transceiver.)

Compatible Camera List:
Nikon: D70, D70S, D80, D90, D200, D300S, D600, D700, D800, D3000, D3100, D3200, D5000, D5100, D5200, D5300, D7000, D7100

Compatible i-TTL Flash List:
Yongnuo YN-465N, YN-467N, YN-468II, YN-565N, YN-568N
Nikon SB-400, SB-600, SB-700, SB-800, SB-900, SB-910

 

 

Package Include:

 

1 x Yongnuo YN685 Flash speedlite For Nikon

1 x YongNuo Protector Bag

1 x Mini Tripod Base

1 x YN-622N-TX Wireless Flash Controller

1 x LS-2.5/N1 Shutter Connecting Cable

1 x LS-2.5/N3 Shutter Connecting Cable

2 x Manual in English and Chinese

1 x One Year Warranty Card

7 x Color Filters

1 x Color Filter Slot

1 x Honeycomb Grid

1 x Adapter

1 x Diffuser

Storage bag x 1

 

Notice: not include the batteries.

 

 

 

 

Selens Strobe Diffuser + Color Filter + Snoot + Adapter

 

Package Includes:

 

 

 

 

 

 

 

 

MN-DF Diffuser:

 

Excellent silica gel material is translucent,

soft and resistant to high temperatures.

 

Softens the flow of light and removes shadows for perfect shooting.

 

Omnidirectional strobe diffuser converts from bright light to soft light.

 

You can take better shots.

 

 

 

 

 

 

 

 

MN-BO Diffuser:

 

Magnetic design with strong magnets,

you can install and replace it quickly.

 

360° rotatable for different shooting angles.

 

Made of soft silica gel material that can be squeezed with force,

and can be opened quickly and not easily deformed.

 

Softens the light from flash, speedlight and provides better shooting effect.

 

 

 

 

 

MN-SN Snoot:

 

Magnetic design allows you to quickly attach it to any strobe.

 

Nut is an essential accessory for those who want to irradiate the pinpoint.

 

 

 

 

 

 

 

 

 

 

Adapter:

 

Adapter for attaching each accessory to a clip-on strobe

 

Uses a strong magnet that allows you to attach it to your strobe easily and quickly.

 

Made of rubber, it is resilient and compatible with various sized strobes.

 

Recommended to be used in combination with the "diffuser" and "snoot" in the set.

 

 

 

 

 

 

 

Color Filter:

 

Made of highly transparent material,

the color temperature is gentle

 

You can freely mix and match the color between them,

so you can change different effects.

 

Affordable size and compact, can be stored in pant pocket.

Lightweight and convenient to carry.