Vehicle Bolt Pattern: 5x4.5"/ 5x114.3mm
Wheel Bolt Pattern: 5x4.5"/ 5x114.3mm 
Hub/Center Bore: 64.1mm With Hub centric
Thickness:1 inch /1" /25mm
Thread pitch: M12x1.5/12-1.5
Material: T6 6061 Billet Aluminum
Quantity: 4pcs Forged Wheel spacers with 20 pcs open end lug nuts 
 
Picture 3 of 5
 
The 5x4.5 wheel spacers 1 inch are CNC machined from 6061-T6 aluminum billet, stronger and lighter
The 1 inch 5 lug wheel spacers Pre-installed 10.9 grade bolts can improve strength to ensure safety.and will not easily rust and discolor.
Anodized surface has additional corrosion resistance,and not easy to rust and fade.
The 1 inch 5x114.3 wheel spacers increases the tire clearance and resolves the gap between the wheels when in contact with the shock absorbers or calipers. The vehicle can be fitted with wider, larger or high traction tires, making your vehicle more aggressive.
 
Picture 4 of 5
 
Please check Year/Make/Model in Ebay Compatibility.

Acura
2016-2022 CDX 
2001-2003 CL
2005-2011 CSX
2012-2022 ILX
1997-2001 Integra Type-R  
2001-2006 MDX

Honda
1998-2002 Accord ( 5-Lug Only)
2003-2022 Accord
1999-2022 Avancier
2015-2022 BR-V
2020-2022 Breeze
2006-2022 Civic
1998-2022 CR-V
2013, 2015-2022 Crider  
2004-2022 Elysion 
2010-2016 FCX Clarity 
2004-2009 FR-V
1999-2012 Inspire 
2018-2022 Inspire 
2003-2006 Integra 
2013-2020 Jade
1999-2004 Lagreat 
1997-2003 Legend 
2003-2006 MDX
1994-2004 Odyssey
2003-2007 Pilot
1997-2001 Prelude (5-Lug Only)
1994-2000 Shuttle 
1996-2022 Stepwgn 
2007-2022 Stepwgn Spada 
2000-2014 Stream

Picture 5 of 5

BEFORE INSTALLATION
1.Choose the right wheel spacer
Please check the model and the product specifications before purchase.
2.Choose the right thickness
Wheel Stud Length:Your vehicle's wheel studs need to be less than 1" (25mm). If not, the back of your wheels need pockets long/wide enough for your studs.
Fender Gap: Measure your wheel gap for clearance. You will need at least 1" (25mm) of fender clearance to prevent the wheel/tire from hitting the fenderliner.
 
DURING INSTALLATION
-Use wire brush to clean gunk firstly. And it will better put some loctite on the hub and thread pitch, which will be easy to install.
-Recommend to use  torque wrench ensuring proper mount.DO NOT USE AN IMPACT WRENCH!
-It is also important to tighten lug nuts or bolts incrementally to the final torque specification, and doing so in the proper sequence.
 
AFTER INSTALLATION
-Please re-torque all lug nuts after 25-50 miles of driving, then again every 1-2,000 miles.(It is recommended that the torque should not be lower than 90ft/lbs)
-if you meet any problems,please contact us any time~
PushAuction


On Mar 31, 2024 at 18:25:13 PDT, seller added the following information:

DataCaciques