10m HIGH PRESSURE SWIVEL HOSE for PRE-2017 KARCHER COMMERCIAL STEAM CLEANERS & PRESSURE WASHERS 

...from a Trusted Specialist KARCHER Sales, Service & Spares Dealer since 1987 - your assurance of Quality, Experience & Expertise

Premium Quality Hose with a Triple Washer, 11mm Stainless Steel Swivel Fitting for ORIGINAL KARCHER TRIGGER GUNS ONLY as fitted to models HD 7125 XPERT etc.   

  • A Quality Replacement for Burst, Damaged, Kinked or Braiding-Exposed Hoses.
  • Don't take chances ignoring obvious damage and excessive wear - fit a new hose promptly.
  • Remember that hoses are subject to very high pressures, heat, abrasion and being driven over.  
  • Avoid accidents from scalding, high pressure puncturing and chemical exposure by replacing in good time.

***PLEASE READ DESCRIPTION BELOW TO ENSURE CORRECT FITTING BEFORE PURCHASING***  

SPECIFICATION AS FOLLOWS:

  • 5/16" bore, steel reinforced rubber hose
  • 11mm O/D Spigot with 3 lock washers (as in photo)
  • Stainless Steel Spigot - beware of cheap corrosion-damaging mild steel
  • M22F Extended female threaded coupling at machine end 
  • 10m (33 feet) full length - NOT cheaper shorter 30 feet (9m)
  • 150 degrees centigrade working temperature (steam rated) 
  • 210 Bar pressure rated (3,087psi, single wire braided)
  • Heavy Duty O-Rings fitted within coupling at each end of hose
  • Integral Swivel Collar - locates into base of trigger gun to support hose. 
  • German Original Quality Hose - not Chinese, Italian or Middle East
  • Premium specification alternative to cheaper aftermarket hoses
  • Legally stamped with pressure rating and date of manufacture
  • ISO 9002 Manufactured - your assurance of the highest standards
  • Quality end couplings for long service life and easy fitting / removal
  • Tough flexible end cuffs to protect against excessive side pulling
  • For use with either electric (240v), diesel or petrol powered machines
  • Fitting Instructions Included

OTHER HOSES AVAILABLE

  • KARCHER 1/4" (single washer) swivel gun type available (see other listings)
  • Heavy Duty Double-Braided Hoses (400 Bar) for 3-phase (415) machines - (see other listings)  
  • KARCHER 3/8" (M22F x M22F) for older machines and other makes (see other listings)
  • Longer or Shorter hoses, double steel braided (H/D) or with different end fittings also available - look in our shop! 

Secure Packing & Rapid Next Day delivery is only £9.99 (order by 1pm) Highlands, Islands & Ireland will cost more, ask first.

Any questions, please contact us via our details below or send us an eBay message. 

Our Price includes VAT @ 20%. A VAT invoice will be issued with EVERY sale.

Check out our other KARCHER items DELIVERED FREE if ordered with this item!

ICE Limited - a Specialist KARCHER & Numatic Sales, Service & Spares Dealer since 1987.