SunshineTronic HDMI Audio-Extraktor
SunshineTronic HDMI Audio-Extraktor mit
integriertem HDMI Repeater koppelt den HD Audiostream aus einer HDMI Quelle aus.
Sie können die von der HDMI Quelle entgegengekoppelten Audiosignale (digital und
analog) an eine Surround-Anlage, einen Audio-Verstärker, einen Kopfhörer oder
ähnliche Geräte weiterleiten. Das HDMI-Signal läuft parallel aus dem HDMI
Konverter weiter.
Der SunshineTronic HDMI Audio-Extraktor ist aus sehr
hochwertigem Material hergestellt und wird in Betrieb nur sehr gering Strom
verbrauchen. Er kann in den meisten Fällen ohne externe Netzteil in Betrieb
genommen werden, da der Strom aus dem HDMI Kabel bezogen wird.
Der
Lieferumfang enthält ein mini-USB Netzkabel. Durch das mitgelieferte mini-USB
Kabel besteht die Möglichkeit, die Stromversorgung des Extraktors aus allen
Geräten mit USB Anschluss(5V@500mA) zu ermöglichen.
- Unterstützt HDMI
Signale bis Ultra HD(4K x 2K) und 3D - Unterstützt HDMI Abtastraten bis zu
192 kHz, 3D-fähig - Unterstützt integrierte Audio EDID Schalter LPCM2,
5.1/7.1 oder Bitstream - HDMI Audio Formate: PCM2, 5.1/7.1CH, Dolby 5.1, DTS
5.1, D-TrueHD, DTS-HD - Digital Audio Ausgang(Toslink): PCM2, Dolby 5.1, DTS
5.1 - Analoges Audio Ausgang(3,5mm Klinke): LPCM2 - Frequenzbandbreite:
2,97Gbps - Eingang: 1x HDMI-Buchse - Ausgang: 1x 3,5mm
Klinke-Buchse(analog), 1x Toslinkausgang(digital), 1x HDMI-Buchse - Gehäuse:
Metall - Maße: Länge(Tiefe): 61mm, Breite: 71mm, Höhe: 20mm -
Betriebsspannung: 5 V
Liefrumfang: 1x HDMI Audio-Extraktor mit
integrierter HDMI Repeater 1x 1,5m Toslink Kabel 1x
mini-USB Kabel 1x Bedienungsanleitung(EN)
SunshineTronic HDMI Audio-Extraktor
Sunshine Tronic HDMI audio extractor with integrated HDMI repeater coupled
out of the HD audio stream from an HDMI source. You can connect to the
counter-coupled HDMI source audio signals (digital and analog) to a surround
sound system, an audio amplifier, headphones or similar devices. The HDMI signal
runs parallel from the HDMI converter further.
The Sunshine Tronic HDMI
Audio Extractor is made of very high quality material and will consume very low
power operation. It can be put into operation in most cases without external
power supply, because the current from the HDMI cable is based.
The
package includes a mini-USB power cable. The included mini-USB enables offers
the power of the extractor from any device with USB port (5V @ 500mA).
-
Supports HDMI signals up to Ultra HD (4K x 2K) and 3D - Supports HDMI
sampling rates up to 192 kHz, 3D-capable - Supports built-in audio EDID
switch LPCM2, 5.1 / 7.1 or Bitstream - HDMI audio formats: PCM2, 5.1 / 7.1CH,
Dolby 5.1, DTS 5.1, D-TrueHD, DTS-HD - Digital audio output (Toslink): PCM2,
Dolby 5.1, DTS 5.1 - Analog audio output (3.5mm jack): LPCM2 - Response
Bandwidth: 2,97Gbps - Input: 1x HDMI socket - Output: 1x 3.5mm jack
(analog), 1x Toslink socket(digital), 1x HDMI socket - Housing: Metal -
Dimensions: Length (depth): 61mm, width: 71mm, height: 20mm - Operating
voltage: 5 V
Contents 1x HDMI audio extractor with integrated HDMI
Repeater 1x 1.5m Toslink cable 1x mini-USB cable 1x User Manual (EN)
|
|