What Is NEXAS NexLink Bluetooth Code Reader?

Nexas NexLink is a user-friendly and small OBD2/EOBD Bluetooth interface that turns your smartphone, pad or laptop into a sophisticated diagnostic tool and real-time performance monitor. Download the required OBD2 app, connect the device, and you can read and clear vehicle fault codes, read live sensor readings, read various live data, etc. Moreover, there is no Bluetooth diagnostic device that can diagnose both cars and motorcycles, but Nexas NexLink can!

The device works for vehicles (which must be OBD2 compatible) all over the world, such as cars and light trucks (minivans, SUVs, pickups, etc.). Generally, these are vehicles sold in the U.S. that were manufactured after 1996, European vehicles manufactured after 2002, and Asian vehicles manufactured after 2008. Some gasoline vehicles manufactured in 1994 and 1995 are also OBD2 compatible (check the exhaust sticker under the hood to determine if it is OBD2/EOBD compatible). Vehicles in other regions that are OBD2/EOBD/JOBD compatible: Argentina-2008(domestic), 2009(import), Australia-2006(gasoline), 2007(diesel), Brazil-2007(gasoline), Canada-1998, China-2008(gasoline), 2011(diesel), European Union-2002 (gasoline), 2004(diesel), India-2010, Israel-2003, Japan-2008, Mexico-2006, Russia-2010, South Korea-2007, New Zealand-2006(gasoline), 2007(diesel).

Why Choose NEXAS NexLink Bluetooth Code Reader OBDII Scanner?

🚩Bluetooth 5.0: Stable connection and fast data transmission. Low power consumption, will not drain your car battery.

🚩Enhanced diagnostics: Read (and clear) manufacturer-specific codes and access live parameters on a wide range of Ford, GM, Mazda, Nissan, Toyota, VW/AUDI/SKODA/SEAT, BMW/MINI and more vehicles.

🚩Unique Motorcycle Diagnostic: This scan tool can be used not only for cars, but also for motorcycles. Take it with your motorcycle so you can ride safely.

🚩Dozens of compatible Apps: More are constantly being added, some may require a separate purchase, this depends on the APP developer.

🚩Unmatched Performance: NexLink is 200% faster than the nearest competitor - View multiple live parameters and enjoy smooth displays and graphics.

🚩Hacker-proof: Unique security mechanisms eliminate the risk of unauthorized access.

IMPORTANT NOTES:

➤A third-party app/software is required to use all the features. (Check the recommendations in the description below, some may require separate purchases).

➤It does not use WiFi for connectivity. When using it with iOS devices, pair NOT with "NEXAS***" from the iOS Bluetooth device list. Launch the app, connect and connect through the app. If you tried to pair the device (and received the error message " Not supported"), please restart your iOS device.

➤If a different fault code is read, it is normal; the fault code under the OBD2 protocol is different from the protocol of the professional equipment used by the workshop, but the engine fault point is the same.

➤If you are not sure whether NEXAS Bluetooth OBDII supports your car, please tell us your car model and year, we will provide you with a suitable APP and tell you how to install and use this device.

➤Please make sure the App you need is compatible with your phone system, or this scanner cannot connect with your phone.

Support OBD2/EOBD Full Functions:

Mode 01: Read dynamic data flow, display error light, ready status.
Mode 02: Query freeze frame data.
Mode 03: Reading the current error code.
Mode 04: Clear error code.
Mode 05: O2 sensor detection test.
Mode 06: Test the specific monitoring system for the vehicle.
Mode 07: Read pending fault codes.
Mode 08: Checking internal vehicle systems or components.
Mode 09: Reading vehicle information.
Mode 0A: Reading a permanent fault code.

Device Setup Instructions:

Step 1: Download APP and install it on your phone/pad.

Step 2: Locate the OBD2 diagnostic port and plug the device into the 16-pin Data Link Connector (DLC) on your vehicle. Make sure the connection is good. "RED LED" is always lit to indicate power. "BLUE LED" flashes when the device is connected for paring or communicating with ECU. If there is no communication, "BLUE LED" may be off.

Step 3: Turn the ignition key to the "ON" position (or start the vehicle in neutral).

Step 4: Activate Bluetooth on your phone/pad. ( On iOS devices: you will see "NEXAS***" in the list of Bluetooth devices, but DO NOT pair it with here. Please go directly to the settings of the app. On Android or Windows devices: pair with "NEXAS***" in the Bluetooth settings of the devices and connect it by entering PIN with 1234 or 0000 )

Step 5: Run the App, make the connection settings. (Please refer to the detailed instructions of connection settings via each app).

Note: Please turn the ignition OFF and remove this OBD2 device from your vehicle after vehicle diagnosis.

Examples of App Setup:

OBDFusion (Android, iOS): settings > preferences > communication > communication type > Select Bluetooth LE (iOS) / Bluetooth(Android).

DashCommand (Android, iOS): preferences > OBD2 adapter > Bluetooth device.

Motoscan ( Android):

Make sure your phone/pad's Bluetooth is turned on.
Android Bluetooth connection settings require prior setup, pairing or connection.
Go to the Configure application (click the "≡ three line icon" in the upper left corner).
Click "Setting" > Select "Connection" > Connection type is set to Bluetooth > Bluetooth device selection Paired device "NEXAS***".

【Important Information】

This scanner only works on OBD2/EOBD cars, usually they are American cars from 1996, European cars from 2000 and Asian cars from 2006.

❗Compatible with iOS, Android, Windows, the Bluetooth connection of Android and IOS is different. For more details, please refer to the instruction manual on APP or the attached user manual.

❗ Third-party app is required for all functions. Some may need to be purchased separately. If you have any questions, please contact the seller.

【Unique Motorcycle Diagnosis】

More functions are waiting to be discovered!

Dash Board Display: I/M Readiness, Battery test, Freeze frame, O2 sensor and EVAP system test, On-Board Monitoring, Performance Test, etc.

Data Flow Waveform: Read the live data, turn off engine check light in a blink of your eye.

Read and Clear Code: Read and clear fault code with the codes definition.

Diagnose Report Display: Diagnostic reports, Built-in OBD2 Fault code look-up library, no google and no guess.

Products Display

Recommend: OBDPROG MOTO 100 is ideal for beginners in motorcycle maintenance and diagnostics.

MOTO 100 is compatible with various types of motorcycles such as standard, ATV, UTV, scooter, snowmobile, touring, cruiser, sport bike, off-road.


➤ Support Most European Models: BMW/Ducati/Honda/KTM/Triumph/Yamaha

➤ Support Most American Models : BRP/Harley/Honda/Indian/Polaris/Victory/Yamaha