• Thanks for choosing RC Engine Bearings USA (cbr10006zu2)

    Many thanks to our new and regular customers, we've been on Ebay over 23 years.

     

    We do combined Shipping and send you a refund as soon as we do your orders.

     

    If you don't see your Engine listed email me I have sets for most engines. 

    PLEASE CHECK FITMENT GUIDE BELOW


  • (3) Premium ABEC3/C3 EMQ BEARINGS Nachi, HCHHSEMQ  come in this kit. The Extra Bearing covers early versions of some engines listed, saves guessing.
  • We get our Bearings from proven reliable US Bearing Suppliers. 
  • We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade soft metals general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We have Fast US Shipping from Western USA.

((NOTE)) Some versions of RF 61, SF 61 and Hanno Special use a different rear Bearing so I include a 3RD Bearing in case you have the early version. (3 Premium Bearings come with your order).

 INTERNATIONAL SHIPPING Discontinued until problems with pricing and shipping are resolved.

 (Included Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)

I've rebuilt over 800 Model Engines if you need Help just email me.

Fitment guide for this set

 ALIGN ENGINES 91 H 91 

  MAGNUM POWER PRO 61 

  MAGNUM POWER XLS 91A 91 

  MUTUNUC 65 65 

  MUTUNUC TAIWAN 61 

  OS ENGINES FX 91 

  OS ENGINES GT15HZ GAS HELI 90 

  OS ENGINES HWC 61 

  OS ENGINES HZ 91 

  OS ENGINES RF ABC (LS) 61 

  OS ENGINES RF-P HANNO SPECIAL 61 

  OS ENGINES RX-H 61 

  OS ENGINES RX-HGL 61 

  OS ENGINES SF 61 

  OS ENGINES SF ABC 61 

  OS ENGINES SF ABC PUMPED 61 

  OS ENGINES SF RING 61 

  OS ENGINES SF-H ABC RC (LS) 61 

  OS ENGINES SF-H RC (LS) 61 

  OS ENGINES SFN-H RC W/7H 61 

  OS ENGINES SF-P 61 

  OS ENGINES SX-H 61 

  OS ENGINES SX-H RING 91 

  OS ENGINES SX-H RING C SPEC 91

  OS ENGINES SX-H RING C SPEC W/ PUMP 91

  OS ENGINES SX-HGL WC 61 

  OS ENGINES SZ-H 70 

  OS ENGINES SZ-H 91 

  OS ENGINES WC 61 

  THUNDER TIGER ENGINES EK4 70 

  THUNDER TIGER ENGINES H 90 

  THUNDER TIGER ENGINES PRO 61 

  THUNDER TIGER ENGINES PRO 90 

  THUNDER TIGER ENGINES PRO 61H BB 61 

  THUNDER TIGER ENGINES PRO 90H 90 

  YS 91 SR 91 

  YS OLD 120 

  YS ST H 61 

  YS ST2 61 HELI 61 

  YS ST4 91 HELI 91 

  YS 80 ST 80

Included Printed Instructions, Tips for Bearings removal and install.

If you don't see your engine listed email me, I have sets for most engines.

(1) REAR NACHI Japan HD Premium Grade ABEC3/C3 HC Chromium Deep Groove Full Metal Cage High Speed open Bearing.

(1) Extra EMQC3HCH Rear Bearing in case you have a early version of some engines.

(1) FRONT HCHEMQ True Seals Deep Groove High Speed Full Metal Cage Premium Grade ABEC3/C3 EMQ rated HC Chromium Steel Sealed with Mobil high temp Grease (Options/Seals (2) ,Open or Seal on One Side) Ships Sealed (2) Seals.

I'm VeriSign, PayPal Verified . I've been on Ebay 22+ years, most of my items qualify for PayPal's Money Back Guarantee.

Bearing Type & Specs

Type Premium ABEC3/3 Open

Bearing Material: HC Chromium EMQ 

Enclosure Open

RPM Oil (x1000): 30

 (1) Nachi HD Rear Premium Hi Speed 16003 ( 17 x 35 x 8mm) Hi Speed HC Chromium ABEC3/C3 Deep Groove Premium Bearing.

 (1) HCHEMQ Rear Premium Hi Speed 6903 ( 17 x 30 x 7mm) Hi Speed HC Chromium ABEC3/C3 Deep Groove Premium Bearing.

 (1) HCHEMQ Front Premium ABEC/C3 HC Chromium High Speed , can be run open or sealed on 1 side or both. Ships SEALED

R6/2RSc3  FRONT   Bore-3/8    OD-7/8    Width-.281


Endurance Bearing Testing 

Independent Endurance testing has verified our Premium Bearings Outperformed all low cost bearings and matched or exceeded the performance of well-known brand name bearings.

Thanks again to all our regular and new Customers for our 5 Star Seller.com Rating.

Engine BEARING Care and storage info.
Why pay $30 or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.