Product Description
This compressor can be mounted just about anywhere in your vehicle as there is no need for a belt or mechanical drive!
You can mount these compressors in an engine bay, a boot / trunk, under a tray of a ute / pickup or truck!
You will need a decent alternator with an output of at least 100A and up to manage the 66 Amp current draw that this compressor will require at its full speed rated at 4000rpm.
Comes with a set of Suction & Discharge pad to MIOR adaptors to allow the use of standard FOR screw on fittings.
Discharge is #8
Suction is #10
Displacemant = 18CC
RPM / 3 Speeds = 1st speed 3000rpm / 2nd speed 3500rpm / 3rd speed 4000rpm
Low displacement combined with high rpm = efficiency.
Max Cooling = 1.94KW
Controlling the compressor
Using the vehicles air conditioning thermostat located in the factory evaporator box / under dash unit to trigger a mini relay. (Not included but can be supplied separately)
Wiring diagram will be supplied either physically or by e-mail.
Powering the compressor
You will require the following items / these are not included (We can supply these, please see our store or just ask us).
1. 100A MIDI Fuse and holder
2. Continuous duty solenoid
3. 6 B&S Cable per metre depending on where you mount the compressor
4. Mini relay
Overall compressor dimensions
Width 123mm
Length 173mm
Height 154mm
VERY IMPORTANT *COMPRESSOR HAS TO BE MOUNTED AS IN PHOTOS WITH THE TROUGH BOLT MOUNTING POINTS AT THE UNDERSIDE OF THE COMPRESSOR, THIS CAN NOT VARY OTHERWISE COMPRESSOR WILL SUSTAIN DAMAGE OR FAIL*
Refrigerating capacity: 1.94KW
Rated Voltage: DC12V
Application: Automotive air-conditionRefrigerant: R134a/500g(Not include)
Compressor cooling: Inhalation refrigerant cooling
Displacement: 12ml/rev
Refrigerator oil: EMKARATE RL68H/150ml (Include)
Energy efficiency ratio: 2.73
Rated current:35-65A
Notes:
1.Rated capacity and rated input power are measured by using the equipment including the calorimeter meets to JIS B8606. Minimum allowable capacity is 30% of rated capacity, maximum allowable input is 150% of rated input.
2.Sound level is measured at the point 30cm away from the compressor surface in a sound measuring room.
3.
Start-up performance:
a.The minimum starting voltage is 80% of the rated voltage in theory.
b. Make the suction and exhaust of the compressor as balanced as possible at the
beginning of boosting, and the limit pressure difference of starting is 0. 8Mpa.
c..Compressor temperature should be lower than 70° C at start-up.
packing list:
1*electric compressor
Payment is Expected within 2 business days.
Our preferred method of payment is Paypal.