Flowfit Cetop 5 NG10 Detent Offset 2 Position Solenoid Valve. 2D2 - P Port Open to A Port, B Port Open to Tank
FLOWFIT CETOP 5 NG10 2 POSITION SOLENOID VALVE
Flowfit offer a large range of solenoid operated CETOP 5 NG10 valves, max flow 120 l/min commonly used in hydraulic power packs and other hydraulic applications.
Available Voltage: 12 V DC, 24 V DC, 110 V AC 50Hz and 220 V AC 50Hz
Flowfit F5-03 series CETOP 5 NG10 solenoid valves are electro-hydraulic spool type valves. They are solenoid operated and control the start, stop and direction of the oil flow in the hydraulic circuit.
Flowfit valves are used for hydraulic power packs as well as stand-alone hydraulic manifold blocks.
2D2 Spool Configuration
P to A, B to T >> P to B, A to T (2D2 Spool Type)
Specification:-
Nominal Size: NG10
Maximum Flow Rate: 120 l/min
Maximum Pressure: A, B, P = 315 Bar T = 160 Bar
Seal Material: - NBR
Max Fluid Temperature: -20 degrees celcius to +70 degrees celcius.
Oil Viscosity: - 2.8 to 380 mm2/s
Switch Cycles Open: - 50 to 60 ms.
Switch Cycles Closed: - 50 to 70 ms.
Switch Frequency: 15000 times per hour.
Insulation Grade: IP65
Weight: Single Solenoid: 4.8kg
Voltages: 12VDC = D1, 24VDC = D2, 110V/AC 50HZ = A1, 220V/AC 50HZ = A2
Manual Override: Standard on all valves
Connector Type: din Plug (with LED)
2D2 - P Port Open to A Port, B Port Open to Tank