1 Stück / 1 piece VND5025AK-E
Double channel high side driver with analog
current sense for automotive applications
41 V | 25mΩ | 41 A | PowerSSO-24 package
VND5025AK  VND5025AK   VND5025AK

The VND5025AK-E is a monolithic device made using STMicroelectronics VIPower M0-5 technology, intended for driving resistive or inductive loads with one side connected to ground, and suitable for driving LEDs. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). This device integrates an analog current sense which delivers a current proportional to the load current (according to a known ratio) when CS_DIS is driven low or left open. When CS_DIS is driven high, the CURRENT SENSE pin is in a high impedance condition. Output current limitation protects the device in overload condition. In case of long overload duration, the device limits the dissipated power to safe level up to thermal shut-down intervention. Thermal shut-down with automatic restart allows the device to recover normal operation as soon as fault condition disappears.
  • Main
    – In-rush current active management by power limitation
    – Very low standby current
    – 3.0V CMOS compatible input
    – Optimized electromagnetic emission
    – Very low electromagnetic susceptibility
    – In compliance with the 2002/95/EC European directive 
  •  Diagnostic functionsDoc ID 12581
    – Proportional load current sense
    – High current sense precision for wide range currents
    – Current sense disable
    – Thermal shutdown indication
    – Very low current sense leakage
  • Protection
    – Undervoltage shut-down
    – Overvoltage clamp
    – Load current limitation
    – Self-limiting of fast thermal transients
    – Protection against loss of ground and loss of VCC
    – Thermal shutdown
    – Reverse battery protection

NOT PULLED - NOT USED - NOT REFURBISHED - NOT SOLDERED - NOT RE-MARKED - NOT FAKED EXCLUSIVELY NEW OLD STOCK (NOS)
AUSSCHLIESSLICH NUR ALTE NEUE WARE (NOS) aus Altlagerbestand - entnommen aus der original Verpackung (siehe Foto).
Bitte fragen sie uns an, falls sie größere Stückzahlen benötigen oder geben Sie uns hierzu Ihren Preisvorschlag.