FSP FSP060-RHAN3 60W AC to DC output 12V 5.0A With Screw Lock(in) Power Adapter
*Barrel adapter sizes: 5.5 x 2.5mm
* Ship content: AC to DC power adapter only
* Power cord not included
* Most of our adapters come in bulk without retailer packing.
Feature
- Meet IEC 62368 & IEC 60950
- Meet Code of Conduct Version 5 Tier 2
- Meet High Altitude 5,000M Design
- High Reliability
- EMC Standard: EN55032 / EN55024 Class B
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
This product is a 60 watts AC to DC power supply intended for use in IPC
Systems, Embedded Systems, Printers, POS Systems, etc that have a
middle wattage demands. This adapter operates at 90 to 264 VAC input
voltage . The unit meets EN55032, EN55024 and FCC class B emission
limits, and is designed for ITE application
APPLICATION
IPC systems, embedded systems, IPC Systems, Embedded Systems, Printers, Monitors and POS Systems,
PRODUCT HIGHLIGHT
V-Output: 12V
O/P Current: 5.0A
Socket Type: C14
INPUT ELECTRICAL
Input Voltage: 90 ~ 264 V
Input Frequency: 47 ~ 63 Hz
Input current:100Vac, 240Vac / full load ≦ 1.0A
No load power consumption: 115Vac , 230Vac ≦ 0.075W
Touch current: 264Vac / 50Hz ≦ 0.25mA
INPUT SPECIFICATIONS
Power factor: N/A
Power turn-on time: At 100Vac / full load, output voltage shall remain
regulation ≦ 3Sec
Hold-up time: At 100Vac or 240Vac / full load, output voltage shall
remain regulation ≧10ms
Inrush current: 100Vac, 240Vac / full load , Shall be less than the
rating of adapter critical component (including rectifiers,
fuse surge and current limiting device)
Operating altitude: 5000 meters above sea level
Withstand voltage: Between AC input and secondary applied DC
4242V,test time 1 minute,cut off current shall be less
than 10mA
MTBF: 100Vac, 240Vac / full load , 300,000 hours at 25℃,
standard SR332
Power de-rating:
OUTPUT SPECIFICATIONS
Protection:
Over voltage:The adapter will enter into shut down
that means no output while over voltage
happened at output terminal that caused
by internal fault,the output trip voltage
shall not exceed 28 vlots.That will be
return to normal state by AC reset.
Short circuit &
Over current: When an internal fault occurs,or an
external fault is applied to the output,
the power suppy shall shut down and
enter auto-recovery mode.
Over temperature: The power supply will enter into shut
down while the abnormal thermal rise
occurs.That will be return to normal
state by AC reset
Brown-out: Shutdown and no damage
@Please see the pictures
for full details and description of any imperfections.
@Ship to 48 continental
states only (Excluded PO Boxes, APO/FPO)
@Buyers please check your
system was compatible before buying/bidding.
@If you have any question
please email before you buying/bidding.
@Seller do not offer return or
refund for any reasons: e.g workmanship, performance, appearance or
compatibility etc... Buyer must take this rise before buying or bidding.
@Please do not leave negative
or neutral feedback, or open a case without contacting me first! If you are not
satisfied with your purchase in any way, please contact me first! I will do the
best I can try to resolve any problems you may have!