MIRROR PRO Hybrid Polymer Adhesive
For Mirrors And Glazed Products
PRO (HYBRID) RANGE OF SEALANTS &
ADHESIVES
Description:
A one part polymer based high strength
adhesive which is non‐corrosive for the fixing of mirrors and
glazed
products.
Benefits:
Non‐corrosive.
Solvent‐free and
odourless.
Quick curing.
Excellent adhesion.
Can be applied to wet surfaces.
For interior use.
MIRROR PRO is a ready to use adhesive
suitable for use on
mirrors, glass and ceramics, which is
non-corrosive and odourless.
It has outstanding resistance to heat
and humidity and does not
require a primer.
Uses
Suitable for internal bonding of
mirros, glazed surfaces, ceramics,
enamel, metals, PVCu, polycarbonate and
treated or untreated
wood to most common substrates.
Application
Ensure all surfaces are clean and free
from grease, oil or any other
contaminants that may hinder adhesion.
Carefully cut the tip of
the cartridge, taking care not to
damage the threaded area. Cut
off top of nozzle at an angle of
approximately 45˚ to an opening of
approximately 10mm. Screw on nozzle and
place cartridge in a
standard sealant gun.
For glass thickness of 2 to 4mm apply a
10mm bead of adhesive at
100mm intervals vertically to the back
of the mirror, or surface to
be bonded. Place the mirror in position
and apply even pressure.
Provide temporary support (tape) whilst
the adhesive cures. The
edges of the mirror can also be sealed
with MIRROR PRO if
required but leave 24 hours after
fixing.
For glass thicknesses above 6mm,
mirrors greater than 1m2 area or
mirrors on ceilings or sloping walls,
MIRROR PRO MUST be used in
conjunction with mechanical fixings.
Limitations
Do not use on surfaces that bleed oils
or plasticisers. Do not use in
the manufacture of structural glazing.
Any mirror made with 6mm glass or thicker needs mechanical fixing.
Any mirror on a sloping wall or ceiling
must have mechanical
fixings. Any mirror greater than 1m2
must have mechanical fixings.
DO NOT use on safety mirrors.
Container Size
EU3 plastic cartridge.
Colour
Available in white.
Shelf Life
12 months from date of manufacture when
stored in unopened
cartridges.
Storage Conditions
Store in original, unopened cartridge,
in a cool, dry place at a
temperature between +5oC and +25oC.
Disposal of Containers
Do not leave empty containers where
residue could be harmful to
children, animals or the environment.
Remove any containers to a
central disposal point in accordance
with local regulations.
Health & Safety
Please refer to separate material
safety data sheet for full
handling, use and storage instructions.
Keep out of reach of
children. It is the users
responsibility to determine suitability for
use. If in doubt contact our Technical
Department for advice.
Note: this information is for general
guidance only, since site conditions
and labour are beyond our control. It
is recommended that users make
their own tests to determine
suitability
Specification Summary
Curing in 24 hours 2.5mm
Shrinkage Nil
Skinning Time approx 10 minutes
Hardness Shore A (DIN 53505) 45+/-4
Temperature Resistance -30oC to +95oC
Application Temperature +5oC to +40oC
Storage Temperature +5oC to +25oC
Product Details:
Colour: White
Code: BDMPROWH
Size: EU3
Barcode: 5056437400369
Package Content
Bond It Mirror Pro Glass Ceramic
Adhesive Glue Grade EU3 White Silicone Sealant