2pcs MIRROR PRO Hybrid Polymer Adhesive For Mirrors And Glazed Products

PRO (HYBRID) RANGE OF SEALANTS & ADHESIVES

 

Description:

A one part polymer based high strength adhesive which is non‐corrosive for the fixing of mirrors and glazed

products.

 

Benefits:

Non‐corrosive.

Solvent‐free and odourless.

Quick curing.

Excellent adhesion.

Can be applied to wet surfaces.

For interior use.

 

MIRROR PRO is a ready to use adhesive suitable for use on

mirrors, glass and ceramics, which is non-corrosive and odourless.

It has outstanding resistance to heat and humidity and does not

require a primer.

 

Uses

Suitable for internal bonding of mirros, glazed surfaces, ceramics,

enamel, metals, PVCu, polycarbonate and treated or untreated

wood to most common substrates.

 

Application

Ensure all surfaces are clean and free from grease, oil or any other

contaminants that may hinder adhesion. Carefully cut the tip of

the cartridge, taking care not to damage the threaded area. Cut

off top of nozzle at an angle of approximately 45˚ to an opening of

approximately 10mm. Screw on nozzle and place cartridge in a

standard sealant gun.

 

For glass thickness of 2 to 4mm apply a 10mm bead of adhesive at

100mm intervals vertically to the back of the mirror, or surface to

be bonded. Place the mirror in position and apply even pressure.

Provide temporary support (tape) whilst the adhesive cures. The

edges of the mirror can also be sealed with MIRROR PRO if

required but leave 24 hours after fixing.

For glass thicknesses above 6mm, mirrors greater than 1m2 area or

mirrors on ceilings or sloping walls, MIRROR PRO MUST be used in

conjunction with mechanical fixings.

 

Limitations

Do not use on surfaces that bleed oils or plasticisers. Do not use in

the manufacture of structural glazing. Any mirror made with 6mm glass or thicker needs mechanical fixing.

Any mirror on a sloping wall or ceiling must have mechanical

fixings. Any mirror greater than 1m2 must have mechanical fixings.

DO NOT use on safety mirrors.

 

Container Size

EU3 plastic cartridge.

 

Colour

Available in white.

 

Shelf Life

12 months from date of manufacture when stored in unopened

cartridges.

 

Storage Conditions

Store in original, unopened cartridge, in a cool, dry place at a

temperature between +5oC and +25oC.

 

Disposal of Containers

Do not leave empty containers where residue could be harmful to

children, animals or the environment. Remove any containers to a

central disposal point in accordance with local regulations.

 

Health & Safety

Please refer to separate material safety data sheet for full

handling, use and storage instructions. Keep out of reach of

children. It is the users responsibility to determine suitability for

use. If in doubt contact our Technical Department for advice.

Note: this information is for general guidance only, since site conditions

and labour are beyond our control. It is recommended that users make

their own tests to determine suitability

 

Specification Summary

Curing in 24 hours 2.5mm

Shrinkage Nil

Skinning Time approx 10 minutes

Hardness Shore A (DIN 53505) 45+/-4

Temperature Resistance -30oC to +95oC

Application Temperature +5oC to +40oC

Storage Temperature +5oC to +25oC

 

Product Details:

Colour: White

Code: BDMPROWH

Size: EU3

Barcode: 5056437400369

 

Package Content

2pcs Bond It Mirror Pro Glass Ceramic Adhesive Glue Grade EU3 White Silicone Sealant