BATH & KITCHEN SEALANT FUNGAL
RESISTANT WATERBASED SILICONE BATH SINK
ITEM DESCRIPTION
A high quality, permanently flexible,
waterbased sealant with good adhesion to plastic, ceramic tiles, wood and
porcelain. It can be over painted and is easy to use. Can also be used as a
grout repair.
Uses
Bond It BATH & KITCHEN SEALANT
can be used to seal around baths, sinks and worktops, forming a watertight bond
to the surfaces. Contains a powerful anti-fungal compound to prevent mould
growth. Easy to apply and any mistakes can be easily rectified with water.
Preparation
All surfaces must be clean, dry,
sound and free from dust, oil or any other contaminants that may
hinder adhesion. If necessary, in addition to mechanical means,
cleaning with a solvent such as acetone is recommended for degreasing.
Application
Apply using a standard sealant gun.
Cut tip from cartridge, be careful not to damage the screw thread. Cut the
nozzle at an angle of 45° to an opening slightly larger than the gap to be
sealed. Where there is a deep gap between the bath and the wall fill with foam
strips to provide a backing for the sealant. Apply using a standard sealant
gun. Smooth down within 20 minutes using a slightly wetted spatula. Remove
excess product with a damp cloth. Do not saturate the surface with water, as
this will delay curing the process. Ensure adequate ventilation to ensure
drying, especially in cold damp conditions. Tools should be cleaned using
water.
Note: Protect from water for 24 hours
after application or until a tough skin has developed. Do not subject to
pressurised water.
Baths - half fill the bath with water
to set the bath to mid position, then seal around the edges and leave for 12
hours before emptying.
Colour
White
Size
EU3 plastic cartridge.