BATH & KITCHEN SEALANT FUNGAL RESISTANT WATERBASED SILICONE BATH SINK

 

ITEM DESCRIPTION

A high quality, permanently flexible, waterbased sealant with good adhesion to plastic, ceramic tiles, wood and porcelain. It can be over painted and is easy to use. Can also be used as a grout repair.

Uses

Bond It BATH & KITCHEN SEALANT can be used to seal around baths, sinks and worktops, forming a watertight bond to the surfaces. Contains a powerful anti-fungal compound to prevent mould growth. Easy to apply and any mistakes can be easily rectified with water.

Preparation

All surfaces must be clean, dry, sound and free from dust, oil or any other contaminants that may hinder adhesion. If necessary, in addition to mechanical means, cleaning with a solvent such as acetone is recommended for degreasing.

Application

Apply using a standard sealant gun. Cut tip from cartridge, be careful not to damage the screw thread. Cut the nozzle at an angle of 45° to an opening slightly larger than the gap to be sealed. Where there is a deep gap between the bath and the wall fill with foam strips to provide a backing for the sealant. Apply using a standard sealant gun. Smooth down within 20 minutes using a slightly wetted spatula. Remove excess product with a damp cloth. Do not saturate the surface with water, as this will delay curing the process. Ensure adequate ventilation to ensure drying, especially in cold damp conditions. Tools should be cleaned using water. 

Note: Protect from water for 24 hours after application or until a tough skin has developed. Do not subject to pressurised water.

Baths - half fill the bath with water to set the bath to mid position, then seal around the edges and leave for 12 hours before emptying.

Colour

White 

Size

EU3 plastic cartridge.