Bond it Frame Mate Door & Window
Silicone Sealant For Sealing & Draught Proofing
Description:
A high quality, water resistant acrylic frame
sealant with good adhesion to most building materials. Conforms to
BS EN 15651‐1:2012
Bond It FRAME-MATE DOOR & WINDOW SEALANT is an
easy to clean,
flexible, water resistant joint filler which can be
readily
overpainted. It is suitable for sealing around door
and window
frames and soffit boards. It can also be used for
filling cracks and
joints with low movement.
It is ideal for use on: wood; concrete; brick;
natural stone; artificial
stone and most common building materials.
Preparation
All surfaces must be clean, dry, sound and free
from dust, oil or
any other contaminants that may hinder adhesion. If
necessary, in
addition to mechanical means, cleaning with a
solvent such as
acetone is recommended for degreasing.
Priming
Bond It FRAME-MATE does not require a primer on
most common
construction surfaces. However, in some cases it
may be necessary
to prime concrete or other surfaces for optimum
adhesion. To
determine whether a primer is required a sample
should be
tested.
Contact Bond It Technical Service Department for
recommendations.
Application
Apply using a standard sealant gun with the nozzle
cut at an angle
of 45°, and to an opening slightly larger than the
joint to be
sealed. Tool using a stick, plastic spatula or
SEALANT APPLICATOR TOOL wetted with
soapy water. Do not apply to wet surfaces,
although wetting immediately afterwards
will not have any adverse effects. Tools
can be cleaned in white spirit prior to
curing taking place. Remove excess product with a
damp cloth.
Note: Protect from water for 24 hours after
application or until a
tough skin has developed. Do not subject to
pressurised water.
Limitations
This product is not a silicone sealant! Not
suitable when:
- applied externally during rainy weather.
- applied at temperatures below +5°C.
- used in joints constantly immersed in water.
- used in contact with bituminous products.
- used in areas of high abrasion, e.g. floor
joints.
- for use with plastic baths - use a sealant with
greater flexibility.
Maintenance
Resistant to all common household cleaning
chemicals. In showers and bathrooms best results
are obtained with a weekly clean to prevent
organic build up.
Stains can be removed with commercial bleach.
Cleaning Of Tools
Use Bond It WHITE SPIRIT or MULTI-WIPES.
Container Size
EU3 plastic cartridge.
Colours
Available in white and brown.
Shelf Life
Minimum 2 years from date of manufacture when
stored in
unopened tubes.
Storage Conditions
Store in cool, dry conditions at a temperature
between 5-25oC.
Protect from frost.
Disposal of Containers
Do not leave empty containers where residue could
be harmful to
children, animals or the environment. Remove any
containers to a
central disposal point in accordance with local
regulations.
Health & Safety
Please refer to separate material safety data sheet
for full
handling, use and storage instructions. Keep out of
reach of
children. It is the users responsibility to
determine suitability for use. If in doubt contact our
Technical Department for advice. Note: Contains an
isothiazoline derived biocide.
Note: this information is for general guidance
only, since site conditions and labour are beyond our
control. It is recommended that users make their
own tests to determine suitability.
Specification Summary
Tooling Time Tool within 5 minutes
Skinning Time @20o
C After 20 minutes
Full Cure Time 24 hours depending on bead thickness
and
temperature
Waiting Time Before Painting 1 hour for emulsion
paints
24 hours for solvent based paints
Sag None
Movement Accommodation 12.5%
UV and Weather Resistance Good
Water Resistance Good
Polluted Environments Good
Product Details:
Colour: White Brown
Code: BDFMWH BDFMBR
Size: EU3 EU3
Barcode: 5060021361547 5060021361530
Package Content:
Bond it Frame Mate Door & Window Silicone
Sealant For Sealing & Draught Proofing