Iron can be present in water in soluble form. Effects of iron in water:

• Excessive iron will create a rusty color with reddish or orange staining of plumbing fixtures.
• A metallic taste may also be present with excess iron.
• If iron bacteria is present, gelatinous sludge may be present on plumbing fixtures or cause pipe encrustation.

These test strips are designed to test iron at very low levels in water:

• Simple Dip-Wait-Read Testing Method
• Test strips are stored in a foil pouch to protect them
• Ideal for quick and reliable testing of water
• Accurate results are achieved in less than 3 minutes
• This product is safe and easy to use since there are no chemicals to mix, an MSDS is not required
• These Iron Test Strips are safe and easy to use for fast accurate results within the ranges of 0 to 5 ppm (mg/l), which permits the measurement of typical iron levels found in well, tap and stream water.

The UK maximum contaminant level for Iron is: 200µg/l (0.2mg/l)

Suitable for: any fresh water, including water from tap, well, pond, stream, lake, river

Contains: 5 test strips

Sensitivity: Fe⁺²: 0, 0.05, 0.1, 0.2, 0.5, 1, 2, 5 ppm (mg/l)

Please note, these iron FE⁺² strips (which are for soluble iron) can not be used to test for insoluble iron FE⁺³ iron.

Total Test Time: approx. 2 minutes 40 seconds

How to Use:

1. Dip test strip into the water sample for 30 seconds,
2. Remove the strip and wait 2 minutes,
3. Then match colour change to closest colour on colour chart.

Please note: Store in a cool and dry place (20-30°C) and away from excess heat and direct sunlight. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids.

Please note: that this is a screening test and can not be used to certify water as safe or unsafe for drinking. This test kit provides approximate results ONLY when used in strict accordance with instructions. SimplexHealth expressly disclaims any liability resulting from the use of this product, failure to follow instructions, or reliance of test results. This is not a measuring instrument. Wash hands before and after use. The contents of the kit should not come in contact with food or consumables. Once the test has been completed, dispose of it responsibly. Not intended to diagnose, treat or monitor any medical condition.

Made in USA