Bond It Lami-Mate Timber &
Laminate Sealant Wood Floor Gap Joint Filler 310ml
Laminates Flooring Windows Parquet
Silicone 310ml
Description:
An polymer enhanced, flexible sealant
and gap‐filler designed for sealing all tongue
and groove laminate
flooring. When cured it can be
varnished or wood stained if required. Conforms to BS EN 15651‐1.
Uses
Bond It LAMI-MATE stays permanently
flexible and can be used for
sealing all types of laminate and
hardwood flooring. It is ideal for
draught proofing around timber flooring
to provide an effective
dust and air tight seal. It can also be
used for sealing around
timber window and door frames as well
as all types of fitted
furniture i.e. bedroom and kitchen
fittings, laminate worktops,
etc. LAMI-MATE is also suitable for
sealing glass panels into kitchen
unit doors. Suitable for internal and
external use.
Preparation
Ensure all surfaces are clean, dry and
free from grease or any
contaminants that may hinder adhesion.
Application
Apply using a standard sealant gun with
the nozzle cut at an angle of 45°, and
to
an opening slightly larger than the
joint to
be sealed. Smooth down using a slightly
wetted spatula, piece of wood or
SEALANT
APPLICATOR TOOL. Tools and excess
sealant
can be cleaned with a damp sponge.
If varnishing or staining allow sealant
to cure fully before painting.
Tools can be cleaned in WHITE SPIRIT or
Bond It MULTI-WIPES prior
to curing taking place.
Limitations
Do not use in conjunction with bitumen
or asphalt. For perimeter
use only, do not use in areas subject
to mechanical abrasion. Do
not attempt to sand down.
Caution: The colour on application will
be different to the colour
achieved when fully cured.
Container Size
EU3 plastic cartridge.
Colours
LAMI-MATE comes in 4 colours: teak, pine,
dark oak and light oak.
Shelf Life
Minimum 2 years from date of
manufacture when stored in
unopened tubes.
Storage Conditions
Store in cool, dry conditions at a
temperature between 5-30oC.
Protect from frost.
Disposal of Containers
Do not leave empty containers where
residue could be harmful to
children, animals or the environment.
Remove any containers to a
central disposal point in accordance
with local regulations.
Health & Safety
Please refer to separate material
safety data sheet for full
handling, use and storage instructions.
Keep out of reach of
children. It is the users
responsibility to determine suitability for
use. If in doubt contact our Technical
Department for advice.
Note: this information is for general
guidance only, since site conditions
and labour are beyond our control. It
is recommended that users make
their own tests to determine
suitability
Specification Summary
Tooling Time 5-10 minutes
Full Cure 24-48 hours dependant on size
of bead and temperature
Specific Gravity 1.6-1.8
Solubility in Water Miscible when
uncured
Movement Accomodation 7.5%
Flammability Non-flammable
Product Details:
Colour: Light Oak Pine Teak Dark Oak
Code: BDLSOK BDLSPN BDLSTK BDLSDO
Size: EU3 EU3 EU3 EU3
Barcode: 5060021362667 5060021362643
5056437400611
5056437400628
Package Content:
Bond It Lami-Mate Timber & Laminate
Sealant Wood Floor Gap Joint Filler 310ml