Heavy Duty Front Wheel Bearing Kit for many brands including Case Ingersoll 200/400/3000/4000 Series Tractors
This kit will include FOUR heavy duty front wheel bearings.
Also included are the correct heavy duty snap rings for front axle shafts and cotter pins depending on what your tractor uses. Four bearings are what is needed to be able to do BOTH front tires and wheels. This part replaces Case part numbers: A70398, C12110, C12111, C37470, C37856, C37872, C42624 Wheel Bearings For 3/4 (0.75, 19mm) Axles, Shafts, Spindles etc. Fits MANY Brands Including Case Ingersoll Garden Tractors And Lawn Mowers. These will fit many brands with a 3/4 axle or shaft. This is a very common size for axles and shafts for most garden tractors and lawn tractors as well as carts, wagons, wheel barrows etc that require a 3/4" ID flanged bearing with a 1-3/8" OD and 1-1/2" flange OD. TWO bearings are required PER wheel (inner and outer) so the FOUR bearings included here would be needed to do a complete front wheel bearing replacement. Also included is 2 cotter pins and 2 heavy duty double thick correct snap rings, depending on your tractors style to retain the wheel to axle. 2 bearings for the left tire & Wheel and 2 bearings for the right Tire & wheel. This kit includes 4 total bearing to complete the simple front wheel bearing replacement job for many tractors and mowers. Case Ingersoll Part numbersC12110, C12111, C37872, C42624, C44499 and more.
NOTE: Bearings MUST be packed with grease before installation
SHOP TIP: Hole on outer bearing cage should be lined up as close as possible to grease fitting on wheel hub
These will work for many, many, many brand tractors and mowers you need the same size 3/4" shaft and "wheel hub" 1-3/8 ID for the correct fit. SOME brands they fit Case, Ingersoll, John Deere, Toro, Wheelhorse, Cub Cadet, Areins, Simplicity, MTD, Ford, Murry, Craftsman, Kubota, Massey Ferguson, Allis Chalmers and many more! MEASURE YOUR SHAFT AND HUB ID. It is up to you to order the correct size!THESE WORK ON MANY BRAND TRACTORS these are our kits that we use at our shop to install. These can be Used on MOST Big Wheel and small wheel models made by CASE INGERSOLL from the 400, 4000,4100, 4200 series,Models including 442,444,446,448, 4016, 4018, 4020, 4116, 4118, 4120, 4021, 4023 and more. Also 200 and 3000/3100/3200 series tractors and models 210, 220, 222, 224, 226, 3012, 3014, 3016, 3018, 3020, 3116, 3118, 3120 models. Fits Ingersoll built Massey Ferguson GTX 200 and 300 series tractors. Also fits many 100, 300 series Case and Ingersoll lawn tractor series.
SHIPPING AND PICK UP. Shipping to lower 48 US States or pick up. Most times we have multiple kits made up and on the shelf and ship them out in 1 business day. But we also offer for sale the kits locally at our shop to our customers (without shipping and selling fees) as well as we install them for customers, so we try to keep the inventory for online sales as accurate as we can. But sometimes there is an overlap. So if the rare time a overlap happens we have to make/put the new kits together and then ship them out. Most times this takes 3 to 5 business days. We just wanted to be upfront about that. You can message us to check current inventory.
PLEASE CHECK ALL PART AND MODEL NUMBERS, INFO AND PHOTOS BEFORE BUYING AND FEEL FREE TO ASK QUESTIONS. It is up to you to make sure this fits YOUR tractor before purchasing, THANK YOU. LOOK OVER PHOTOS. What is pictured and the main item in picture (not background) is what you get "FOUR" bearings only. Ask If I can help you in any way.
Follow us on Face Book at Case Ingersoll Garden Tractors Northeast. And You Tube at Case Ingersoll Tractors Northeast
DISCLAIMER/TERMS/CONDITION
I THE SELLER accepts no responsibility or liability for the use of, missuses, abuse, resale of any item purchased. I THE SELLER shall not be responsible for failure of equipment nor complications arising from failure caused or not cause by item sold. Nor any damage or injuries caused by item sold or it's correct or incorrect installation and or use by BUYER or those associated with the BUYER.
Once the product/products/ leave our possession I THE SELLER accepts zero, no responsibility or liability for the use of, misuses, abuse, resale of any item purchased. I THE SELLER shall not be responsible for failure or use of equipment nor complications arising from failure caused or not cause by items sold. Nor am held liable for any damage or injuries caused by items sold or items correctly or incorrectly installed and or used by anyone including BUYER and or installer or those associated with the BUYER or installers. BUYER accepts all this with the purchase as well as ALL AND ANY responsibility and liability as soon as they take possession of item in person or via shipment. It is solely the purchaser’s responsibility to choose qualified trained professionals for correct and safe product installation and
All items/products/goods are purchased by the BUYER are "AS IS" condition, and I THE SELLER make no representation or warranty, expressed, or implied. BUYER excepts all this with purchase as well as ALL AND ANY responsibility and liability as soon as they take possession of item. It is your duty to make sure the item will work for your needs and or fit BEFORE YOU PURCHASE.
So please feel free to ask questions if you need to and we will help to the best we can and THANK YOU. If you have any issues please reach out and contact me.
I have lots of Case Ingersoll parts and items, so let me know what you may need and If I have it we can make a listing so it can be purchased. Thank You