It is an RGB Music Christmas tree kit that consists of the circuit board and allows 37pcs LED flash with music and showing a Christmas tree in RGB (the night environment has better viewing).
It has a built-in motor so that the Christmas tree can rotate automatically which can achieve better dynamic effects when it is working.
It can be used for Christmas, event celebrations and parties, etc. It can be used to create a festive atmosphere.
Users do not need to install the buzzer if not needed. Because it will keep playing music and cannot be stopped.
1>. Complete the correct installation according to the installation steps.
2>. Input right work voltage from 5.5*2.1mm power socket.
3>. The Christmas tree starts blinking automatically.
4>. Start playing simple music automatically.
5>. The bottom LED breathing light automatically starts to work.
6>. Rotate Potentiometer to adjust work frequency for bottom LED
37pcs highlight LED
Perfect simple circuit
Simple music effect
Automatic rotation
RGB LED flashes automatically
The adjustable frequency of the bottom LED
Bottom LED breathing light effect
This is a DIY Kit, you need to weld it yourself
The product only supports wired charging and is equipped with a USB cable
Please read the user manual before you welding it
Work Voltage:DC 4.0V~5.5V
Work Current:500mA
Power Type:DC005 5.5*2.1mm Power Socket
Color:RGB LED
Work Temperature:-40℃~85℃
Work Humidity:5%~85%RH
Size(Installed):63*61*190mm
1>. You need to prepare the welding tool first.
2>. Please be patient until the installation is complete.
3>. The package is a DIY kit. It need finish installing by yourself.
4>. The soldering iron can't touch the components for a long time(1.0 seconds), otherwise, it will damage the components.
5>. Pay attention to the positive and negative of the components.
6>. Strictly prohibit short circuits.
7>. You must install the LED according to the specified rules. Otherwise, some LEDs will not light.
8>. Install complex components preferentially.
9>. Make sure all components are in the right direction and right place.
10>. Check that all of the LEDs can be illuminated.
11>. It is strongly recommended to read the installation manual before starting installation!!!
12>. Please wear anti-static gloves or anti-static wristbands when installing electronic components.
Country | Shipping Way | Shipping Time | Trackable |
United States | USPS(ePacket) | 7-18 | Yes |
Russia | China Post | 15-35 | Yes |
Other Country | Economic Air Mail | 15-40 | No |