About this item

• 🚶[Smart Motion Sensor]🚶‍♀️ The motion sensor cabinet light adopts human thermal infrared detection and sensing technology, which has the characteristics of high sensitivity, anti-interference and fast response. It can detect your movement from it's 120° direction and 3-5M distance. Ideal for dark rooms that don't require continuous lighting or have no cable connections. It's perfect for kitchen cabinets, wall cabinets, benches, wardrobes, mirror cabinets, under shelves, etc.

• 🔋[Long Working Time]🔋 The WOTAOPOT wardrobe light has a built-in 3000mAh rechargeable battery, which can be easily charged by a type-c cable (included in package). When fully charged, this wireless motion sensor wardrobe light lasts 4-6 hours at the highest brightness level in continuous operation mode OR 30-60 days in auto mode. (Working time differs from brightness and mode)

• 🔅[3 Color Temperature & Stepless Dimmable]🔆 Double-click the round button to switch 3 color temperatures (cool white/warm white/neutral white). Long press the round button to adjust the brightness. The led closet light has memory function, it will remember the last set about brightness and light color when it is turned on.

• 👍[Upgraded LED Beads]💡 The cupboard light has 140 lamp beads on the side. The light is soft and not dazzling. because the light will be reflected by the panel, and then is evenly distributed on the surface of the lamp. The high-efficiency white LED technology makes this cabinet light efficient, long-lasting, energy-saving, environmentally friendly, explosion-proof and bright (brightness up to 220 lumens)

• ☀[3 Modes]🌛 Mode "On": As a constant light, turn on/off by short pressing the round button. Mode"Auto2": The light turns on automatically when motion is detected. After about 15 seconds, when no motion is detected, the under cabinet light will automatically turn off. Mode "Auto1": Energy-saving mode. The motion sensor will work in darkness and not work if there is enough brightness around the light.

• 🧲[Magnetic Cabinet Lights]🧲 The are 2 methods to install the led motion sensor cabinet light. Method 1； There are built-in strong magnets, which can be directly attached to all iron furniture. Method 2: Just tear off the paper of 3M glue on the back of 2 iron bunckles, then paste them on the wall or cabinet. The iron bunckles will suck the cabinet light strongly. It is very easy to take it down when charging.

---

Product Description

WOTAOPOT 40CM Dimmable LED Under-Unit Light with Motion Sensor

The LED motion sensor cabinet light is 9 mm ultra-flat with slim aluminum housing. Ideal for use in kitchen cupboards, wall cabinets, workshops, workbenches, wardrobes, mirrored cabinets, under the shelf or in the motorhome. It's perfect for anywhere no need for continuous light and plug.

Package Contents :

1 x 40CM LED Motion Sensor Light

1 x Charging Cable

2 x Iron sheets

1 x product manual

Product Parameters :

Induction Way: PIR motion sensor

Sensor distance: 3-5 m/10-16 ft

Sensor detection angle: 120°

Luminous Flux: 140 lm / 280 lm

Power: 1.4 W / 3 W

Product size: 40.5 x 4 x 0.9 cm

Colour of Light: Warm White/Cool White/Netural White

Three Modes Option

There are 3 modes for the motion sensor closet light you can choose for your needs.

Mode "ON " : The light is controlled by the button to turn on/off. If it's turn on, it will continuously light on.

Mode "Auto 1" : Energy-saving mode. There are built-in light sensing device, which can identify the status of day or night. Motion sensor will not work if there is enough bright.

Mode "Auto 2" : Motion sensor works all the time. The light will detect your movements and turn on. And will turn off after 18 seconds if there is no movements.

High-end 140 LEDs This cupboard light is equipped with 140 high-efficiency white LEDs. The light is uniform and not dazzling. It's safer for your eyes than ordinary LED light. And it's energy-saving, environmental kindly and explosion-proof.	One Key: Easy to Operate Long press the round key to adjust brightness of the wardrobe light(stepless light dimmable from 10%-100%). Double press the round key to select light temperature from Warm/Cool/Natural. It can meet almost all your various needs in different situations.	Easy to Install There are strong magnets built-in the two ends of the cabinet light strip. You can stick the light on any iron frameworks OR install anywhere you want with the help of the iron sheets. Just tear off the 3M glue and stick on the place you want install the light then put the light on the two iron sheets.

Warm Notes:

1. The battery is 3000mAh and will last much longer than ordinary 1500mAh battery. But the lasting time will differ from brighness and color temperature.

2. If the motion sensor doesn't work, please check if the mode is on "Auto 1". In this mode, the motion sensor will not work when there is enough brightness around it.

3. If the light is not on, please check if the battery is run out yet. Please ensure to charge the light fully then try again. (The instruction light will be green if light is fully charged)

4. Do not install the light in cold and hot places, as this may affect the sensitivity.

5. If you have any confuses, please don't hesitate to ask help from us.