Unlike Others Sold On eBay – Elevate Your Work with Our Premium Quality Gloves
White and Grey Nitrile Half Coated Palm Coated Work Gloves - Category 2
+ Resistant to oil & grease
+ Resistant to abrasion & tears
+ Polyester knitting provides improved permeability allowing air flow
+ Reusable
Colour | White and Grey |
Description | Nitrile coated (half dipped), polyester knitted, Seamless Work Gloves |
Sizes | 9 M/L |
Glove Length 255 ±5 x Hand Circumference 235 ±5 x Hand Length 197 ±5mm | |
10 L/XL | |
Glove Length 265 ±5 x Hand Circumference 260 ±5 x Hand Length 209 ±5mm | |
CE Marked | ü |
PPE Regulation | (EU) 2016/425 |
Conforms To | EN420:2003 & EN 388:2016 |
Red / Blue Nitrile Half Coated Black Palm Coated Work Gloves - Category 2
+ Resistant to oil & grease
+ Resistant to abrasion & tears
+ Seamless polyester knitting supports breathability to the hand
+ The serrated special texture provides superior grip
+ Reusable
Colour | Red / Blue |
Description | Nitrile coated (half dipped), polyester knitted, Seamless Work Gloves |
Sizes | 9 M/L |
Glove Length 255 ±5 x Hand Circumference 235 ±5 x Hand Length 197 ±5mm | |
10 L/XL | |
Glove Length 265 ±5 x Hand Circumference 260 ±5 x Hand Length 209 ±5mm | |
CE Marked | ü |
PPE Regulation | (EU) 2016/425 |
Conforms To | EN420:2003 & EN 388:2016 |
Orange Nitrile 3/4 Coated Work Gloves with Cotton Lining - Category 2
+ Ergonomic design and premium Quality knitted cuff ensures controlled grip and advanced comfort
+ Cotton lining
+ Reusable
Colour | Orange |
Description | Nitrile Coated Work Gloves with Cotton lining ¾ Dipped |
Sizes | 9 M/L |
| Glove Length 250 x Hand Circumference 229 ±5 x Hand Length 192 ±5mm |
| 10 L/XL |
| Glove Length 260 x Hand Circumference 254 ±5 x Hand Length 204 ±5mm |
CE Marked | ü |
PPE Regulation | (EU) 2016/425 |
Conforms To | EN420:2003 & EN 388:2016 |
CATEGORY 2
This category of gloves are intended to protect the user from injuries that are not classified as minimal or very risk high.
The gloves must be marked with a pictogram showing the gloves protection properties and are tested according to the
standard EN388, mechanical protection, at an accredited test institute.
All category 2 gloves are validated and type certified by a Notified Body to show the
validity of protection.