100% Authentic
Strike Industries
MASS DRIVER COMP

THESE ARE THE LATEST VERSIONS

For Glock Gen 3
Model 19

The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide.

Package Contents:
-x1 Comp main body
-x1 Recoil spring
-x1 Guide rod
-x1 Guide rod fitment washer
-x1 Guide rod head
-x1 Internal spring

Product Features:
-No threadedbarrel needed (but can be used)
-Eliminates the need for threadedbarrels. 50 State Legal
-Widened bore to reduce baffle strikes and keyholing rounds
-2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide
-No permanent modification of weapon required
-Blended, no snag profile
-Matches with width of the slide, it can be used with open holsters, no special holster needed
-Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil
-Contours with slide dimensions to be compatible with most open-bottom holsters
-Precision CNC machined

ThreadedBarrels: Yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels but doesn't use threads to attach as there are none on the Mass driver. Strike has tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies.

NOTES:
-Designed for and test on OEM GLOCK™ factory and Strike Industries slides
-SI cannot guarantee proper fitment and application on third party slides and frames
-Recommended torque value for guide rod nut is 25 lbs/in.
-Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure
-Loctite® Threadlocker Blue 242® on all threads
-Gunsmith or armorer installation recommended and required by us Tacdom. 
-Product tested with factory GLOCK™ components
-Performance may vary when using third party GLOCK™ components
-Consult with a local gunsmith for any custom modification while use with this product

ALL GUNS USING AFTERMARKET PARTS LIKE THE MASS DRIVER THAT MODIFY THE GAS SYSTEM MUST BE TUNED. 
YOU MUST USE A LICENSED GUNSMITH TO TUNE YOUR GUN FOR PROPER CYCLING.  NOT USING A LICENSED GUNSMITH WILL VOID ANY WARRANTIES. WE DO NOT REFUND OR EXCHANGE AND PARTS INSTALLED WITHOUT A LICENSED GUNSMITH. 

FREE US SHIPPING

Priority option available for $6.95

 

*** We recommend you do your own research to know if this will fit your application and other aftermarket items you installed. Colors are proprietary to this manufacturer. They may be close to other brands, but there is never a color match guarantee. Due to buyers unknown skill level we require all parts to be installed by a licensed Armor. Please have your armor contact the manufacture of additional install details and compatibility. Most parts can require some fitment due to unknown tolerances that you posses. No refunds for self installs.

ease have your armor contact the manufacture of additional install details and compatibility. Most parts can require some fitment due to unknown tolerances that you posses. No refunds for self installs.