eBay

PLEASE CHECK ENGINE Fitment Guide Below.

Thanks for choosing RC Engine Bearings USA (cbr10006zu2)

Many thanks to our new and regular customers, we've been on Ebay over 23 years.

We do combined Shipping and send you a refund as soon as we do your orders.

If you don't see your Engine listed email me I have sets for most engines.

PLEASE CHECK FITMENT GUIDE BELOW

We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade soft metals general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We get our Bearings from proven reliable US Bearing Suppliers with certified grade bearings. Thanks, RC Engine Bearings.

INTERNATIONAL SHIPPING Discontinued until problems with pricing and shipping are resolved.

(Included Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)

I've rebuilt over 800 Model Engines if you need Help just email me.

((( R6-RS2 EMQ ABEC3/c3 sealed ))) ID 0.3750in x OD 0.8750in x Width 0.2812in Dimensions

((( 16002 EMQ ABEC3/c3 open ))) ID 15mm x OD 32mm x Width 8mm Dimensions

(((CAMS 695ZZ precision grade))) 5x13x4

THIS SET FITS

((NOTE OS FL70 uses a different Set I should have it listed)) email if you can't find it in my store.

((NEW OS 95V)) 4 Stroke

OS ENGINES ALPHA 4C 81

OS ENGINES FS 61

OS ENGINES FS 70 II SURPASS 70

OS ENGINES FS 70 SURPASS RC 4C 70

OS ENGINES FS RC 4C 61

OS ENGINES FS-81 81

OS ENGINES FS110-A 110

OS ENGINES FSA 81 4C 81

RJL ALL MODELS 60

YS AIR CHAMBER 91

YS FZ 110 110

YS FZ 110 S 110

YS FZ 91

YS MOST MODELS 91

(4) BEARING KIT W/ CAM BEARINGS PREMIUM ABEC3 for 4 Cycle Engines

The listing is for (4) NEW PREMIUM BEARINGS, not returns, no refurbished or seconds.

You are buying (1) Kit (4) Premium BEARINGS with installation Instructions and Tips Printed comes with order .

If you don't see your engine listed email me, I have sets for most engines.

(1) REAR Premium ABEC3/C3 or better Deep Groove High Speed Full Metal Cage open bearing.

(1) FRONT Premium ABEC3/C3 Deep Groove High Speed Full Metal Cage Chromium Steel with Buna Seal with high temp Grease (Options/Shipped Fully Sealed , Open or Seal on One Side) Ships Sealed.

(2) Precision CAM Bearings with Shields., Tips info for removal will be emailed.

Bearing Type & Specs

(1) Rear HC EMQ Chromium ABEC3/C3 Deep Groove High Speed Bearing

Type Ships Open (sealed on request)

Dimension Type: Metric

Enclosure Open (sealed on request)

RPM Oil (x1000): 30

Quantity (1) Front EMQ Premium ABEC3/C3 HC Chromium High RPM SEALED (2) SEALS, can be run open or sealed on 1 side or both Ships Sealed.

Seals	Buna Double LIP Seals
Lubrication	Wide temperature range Mobil grease (-40 to + 350)
Noise Testing	Noise tested before and after lubrication
Noise Level	Passes V2 Noise Vibration Standards Smaller Sized, V3 Standards.
Precision Balls	HC Chromium Matched ABMA Grade 10 or better for roundness
Raceways	Finely honed Super Finished for long life and low noise
Quality Level	Premium bearings ABEC 3/C3

(2) Precision Cam Bearings included, removal tips will be emailed.

Endurance Bearing Testing

Independent Endurance testing has verified our Premium Bearings Outperformed all low cost bearings and matched or exceeded the performance of well-known brand name bearings.

Thanks again to all our regular and new Customers for our 5 Star Seller Rating.

Engine BEARING Care and storage info.

Why pay $30 or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.