eBay

PLEASE READ THE FOLLOWING CAREFULLY BERFORE ORDER:

1. Please make sure that the LCD screen/panel can still work normally. You can install the screen/panel on the original notebook or monitor for testing. If it fails to display normally, the screen/panel has been damaged. Please do not place orders to avoid unnecessary disputes.

2. We will install the firmware program for free according to the LCD screen/panel model you ordered. So make sure the screen model you ordered is the same as your actual screen model. Otherwise the controller board may be incompatible.

3. If your LCD screen/panel model is not in our sales list, please leave a message with us via eBay. Or send us a photo of the screen model label to help confirm. (The model label can be found on the back of the screen)

4. If you concern much about resolution setting, please reconsider before bidding! DIY need certain professional knowledge. If you have any questions during the operation, please contact us for guidance.

5. Because we need to choose the right kit for your LCD screen/panel, and the supplier may upgrade or update the product, some accessories may differ from the picture. Please refer to the actual product received.

6. This kit is only work for 1366*768 resolution, LVDS 40-Pin signal port, 60Hz LCD screen.

Compatible with the following LCD screen models:

LP156WH4(TL)(A1)

LP156WH4(TL)(B1)

LP156WH4(TL)(C1)

LP156WH4(TL)(C2)

LP156WH4(TL)(D1)

LP156WH4(TL)(D2)

If your screen model is not in the list or you cannot confirm compatibility, please contact us for help.

Controller Board Features:

Work power supply: DC 12V 3A (DC Port: 2.5MM and 5.5MM inner+ outside-)

Please note: Do not use a power supply with a voltage of more than 12 volts, otherwise the controller board will be damaged.

Come In Standby Mode When Not Input Signal (Standby Mode <0.2W Only Board)

Input: VGA, HDMI, AV, USB, RF, Audio

Output: Earphone, PH2.0 4-pin small speaker (optional)

OSD: Brightness, Contrast, VOL+ VOL- ,Language, And So On

Language: Chinese, English

LVDS signal cable length: 250 mm

Board Size: 188mm*37mm

USB port is only used for multimedia playback and firmware update (note: FAT32 format). It cannot supply power to other equipment.

Note: This controller board only supports analog signals and is compatible with PAL.

The kit includes the following accessories:

1PCS* Controller board

1PCS* LVDS signal cable

1PCS* Keypad with cable

1PCS* Controller remote (Batteries not included)

Special Note: In addition to the kit list accessories, You also need to prepare the HDMI or VGA cable and power supply yourself.

If you need DC 12V 3A power supply, Please click here to buy it.

If you need this controller board protective shell, Please click here to buy it.

Controller board kit installation steps:

1. Take away the old screen cable from the LCD panel.

2. Connect the new screen cable to your LCD panel. (Note the connector contact direction)

3. Connect the controller board to the PC with HDMI or VGA signal cable.

4. Input power DC 12V 3A. (Please use the standard LCD screen power supply, other power input may not boot normally)

5. After all finishing the connecting, please do not rush to power on! No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.

Please refer to the figure below to connect the screen cable correctly.

Language Modify:

1. Press the remote control "MENU" to enter the setup menu.

2. Press the left or right button to select the setup option.

3. Select the first item, and then use the left or right button to select the desired language.

Please refer to the photos below.

When the color difference appears on the LCD screen, please try to adjust the screen parameter ID.

1. Use the remote control to press "MENU" or "INPUT", and then press "1 1 4 7" continuously to call up the Factory Settings.

2. Select the "PANEL SETTING" option to enter.

3. Adjust the value in the "LVDS TYPE FOR CPS" option until the color returns to normal.

Note: There may be black screen during adjustment, please don't stop, continue to press the right or left button until it is normal. Do not arbitrarily modify other options in the menu.

Please refer to the following picture.

>>>Payment<<<

We can only accept the payment method recognized by the platform.

Please pay in time after ordering, the earlier you pay, the sooner you receive your item.

If you can't pay it within 5 days, we view you give up.

>>>Shipping<<<

Package will be shipped within 1-3 business days of your payment verification (not include weekend&holidays ).

Before payment, please make sure that your shipping information is correct. Once the package is sent, it cannot be modified.

International Buyers Please Note:

As a buyer, it is your duty to pay the tax when you make a order from abroad. Our price does not include taxes, VAT, or other hidden charges. Please consult the customs of your country or region before placing an order to determine these additional charges.

Refund or replacement request is available only the requests within 1 week after parcel received&returning the item as the same condition as received.

If the item is found non-defective, the item will be sent back to the buyer. Buyer is responsible for All Return Postage and Shipping Charges.

If you need it urgent, please contact us for the special delivery with extra postage.

>>>Feedback<<<

If you received and like this item, please leave us positive feedback , this is very important for us, we also will leave you positive feedback.

If you have any disatisfaction, please do not leave us negative/neutral feedback, please contact/write to us first, giving us a chance to fix problem, we would like to resolve your question asap to let you satisfy, simple negative feedback cannot solve any question, I think the communication is very important to understand each other and is the best bridge for us. Thank you very much.

END Thanks!