• Fitment: 
  • For 2016-2017Hyundai Sonata Sport Tech For 2015-2017Hyundai Sonata (submodel: GL, GLS, Limited, SE, Sport)
  •  
  • Package include:
  • 1× Radiator cooling fan
  •  
  • Notes: The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.
  • For Hyundai Sonata 2015 2016 2017 2.4L Radiator Cooling Fan Assembly

    Fitment: 

    For 2016-2017Hyundai Sonata Sport Tech
    For 2015-2017Hyundai Sonata (submodel: GL, GLS, Limited, SE, Sport)

     

    Package include:

    1× Radiator cooling fan

     

    Notes:
    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

    Step 1: Locate the Radiator Cooling Fan
    Locating the radiator cooling fan is the first step in replacing it. Turn off your car and allow it to cool off. Open the hood of your car and you will be able to see the radiator that is located at the back of the grill at the front portion of your engine compartment. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.

    Step 2: Disconnect the Power Supply
    On the fan motor is an electric cable running towards the engine. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. Using two masking tapes with different colors, note the connection of the wires so that you will not have a hard time reconnecting the wires later.

    Step 3: Remove the Fan Housing
    Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well.  A radiator cooling fan housing is relatively large and you may need to remove all the obstructions like hoses and wirings so that you can extract the fan housing off your car hood. Hold the housing firmly and lift it off your engine compartment. Be careful in removing the fan housing to avoid damaging it. Place the fan housing on a clutter-free working table.

    Step 4: Remove the Radiator Cooling Fan and the Fan Motor
    The fan blade is either pinned or screwed to a shaft. With a screwdriver, loosen the fan blade and slide if off its shaft. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.

    Step 5: Attach the Replacement  Radiator Cooling Fan and Fan Motor
    Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper and secure the new cooling fan and keeper into place. Return the fan housing back into its proper place and secure the screws and the fasteners. Reattach the hoses and wires you removed in step 3. Connect the fan motor into the car electrical system using the electrical tape guide you made in step 2. You just learned how to replace your radiator cooling fan as well as your radiator cooling fan motor.

     


    Item Specifics
    Modified Item No
    NOTE Without control module
    Interchange Part Number 25380-C2000/HY3115151/25380C2000
    Type Radiator A/C Condenser Cooling Fan Assembly
    Manufacturer Part Number 352338
    Shroud Material Plastic
    Superseded Part Number 623700
    Brand auto-summer
    Fitment Type Direct Replacement
    Manufacturer Warranty 1 Year
    Mounting Hardware Included No

    Payment

    Payment Methods

    * Paypal,Google Pay,VISA,Master Card,American Express,Discover,eBay Mastercard.

    Shipping

    Pickup is not available as all items are shipped to buyers - NO EXCEPTIONS
    Orders ARE POSTED BY USPS OR FEDEX.

     

    Returns

    If you are unhappy with your purchase for any reason, US buyers can return it to us in an un-used condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage/eBay costs. Please note you MUST contact us to obtain a Return Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected.

    If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number.

    Important Notice:
    1. Any returned item(s) without Return authorization number will be rejected.
    2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
    3. We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible.

    Feedback

    If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:the Goods must be securely and appropriately packed so they are not damaged during transit;the Goods must be returned in their original packaging;the Goods must be like new and not show any signs of use or having been installed or fitted;The claim for refund must be advised to us no later than 30 days after the date you bought the Good.

    About Us

    ● High Quality
    ● Customer - Service
    ● Affordable Prices

    Store Category
    For Hyundai Sonata 2015 2016 2017 2.4L Radiator Cooling Fan Assembly

    Fitment: 

    For 2016-2017Hyundai Sonata Sport Tech
    For 2015-2017Hyundai Sonata (submodel: GL, GLS, Limited, SE, Sport)

     

    Package include:

    1× Radiator cooling fan

     

    Notes:
    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

    Step 1: Locate the Radiator Cooling Fan
    Locating the radiator cooling fan is the first step in replacing it. Turn off your car and allow it to cool off. Open the hood of your car and you will be able to see the radiator that is located at the back of the grill at the front portion of your engine compartment. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.

    Step 2: Disconnect the Power Supply
    On the fan motor is an electric cable running towards the engine. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. Using two masking tapes with different colors, note the connection of the wires so that you will not have a hard time reconnecting the wires later.

    Step 3: Remove the Fan Housing
    Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well.  A radiator cooling fan housing is relatively large and you may need to remove all the obstructions like hoses and wirings so that you can extract the fan housing off your car hood. Hold the housing firmly and lift it off your engine compartment. Be careful in removing the fan housing to avoid damaging it. Place the fan housing on a clutter-free working table.

    Step 4: Remove the Radiator Cooling Fan and the Fan Motor
    The fan blade is either pinned or screwed to a shaft. With a screwdriver, loosen the fan blade and slide if off its shaft. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.

    Step 5: Attach the Replacement  Radiator Cooling Fan and Fan Motor
    Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper and secure the new cooling fan and keeper into place. Return the fan housing back into its proper place and secure the screws and the fasteners. Reattach the hoses and wires you removed in step 3. Connect the fan motor into the car electrical system using the electrical tape guide you made in step 2. You just learned how to replace your radiator cooling fan as well as your radiator cooling fan motor.

     



    Payment Methods

    * Paypal,Google Pay,VISA,Master Card,American Express,Discover,eBay Mastercard.

    Pickup is not available as all items are shipped to buyers - NO EXCEPTIONS
    Orders ARE POSTED BY USPS OR FEDEX.

     

    If you are unhappy with your purchase for any reason, US buyers can return it to us in an un-used condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage/eBay costs. Please note you MUST contact us to obtain a Return Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected.

    If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number.

    Important Notice:
    1. Any returned item(s) without Return authorization number will be rejected.
    2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
    3. We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible.

    If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:the Goods must be securely and appropriately packed so they are not damaged during transit;the Goods must be returned in their original packaging;the Goods must be like new and not show any signs of use or having been installed or fitted;The claim for refund must be advised to us no later than 30 days after the date you bought the Good.

    ● High Quality
    ● Customer - Service
    ● Affordable Prices


    All rights reserved.