Drop in 3.0'' V5 Laminated 720x480 Retro Pixel LCD Screen+UV Shell Case For GBA Console

 

 

Note: You don't need to cut the shell if you buy the shell from us. Otherwise, you need to cut the shell by yourself.

The Glass screen lens have the LOGO.

Integer Scaling. No any distortions.

Add FRM On/OFF function(Frame blending  On/OFF).

 

 

 

 

Description:

1. 720x480 display resolution. HD LCD.  9 pixels to 1 pixel. Integer scaling. No any distortions.

2. Wide View angle up to 178 degree.

3. Pre Laminated Glass Screen.

4. The PCB has been embedded in the LCD metal shell.

5. Built-in OSD Menu!

6.  Retro pixel Effects: Normal, Retro pixel (like original AGS-101 LCD), Scanline 1 and Scanline 2.

7. 15 brightness levels.

8. 8 color modes.

9.  FRM On/OFF function(Frame blending  On/OFF) is included.  For  some extremly few games,  the image effect will be better when FRM  turned on. For most games, No need to turn on FRM  Function. The default FRM is OFF.

10. Touch Screen to change the brightness and the color modes.

11. Compatible 32pin and 40pin motherboard.

 

*You need to welding 3 wires to control the OSD Menu*

OSD Menu Operation:

-Press the Select+L+R buttons for 1 second at the same time, then release the buttons to activate the OSD Menu.

-Press the Select button to select the adjustment item when OSD Menu activated.

-Press the L or R button to adjust the item when OSD Menu activated.

 

 

You don't need to do any welding if you don't want the OSD menu!

 

 

 

1x Pre-Laminated IPS LCD, 2x Screwdrivers, 3x red wires, 2x ribbon cable

Or:

1x Pre-Laminated IPS LCD, 2x Screwdrivers, 3x red wires, 2x ribbon cable, 1x UV Printed Shell case, 1 set buttons, 1 set Rubber Pad, 1x Sticker   ( You don't need to cut shell case if you choose lcd kit+shell )