This is a new Rain Bird ESP-TM2 Series 8 Zone Station Indoor/Outdoor Sprinkler Timer.

The ESP-TM2 automatic sprinkler timer is the perfect option for basic residential irrigation systems. Building upon Rain Bird’s legacy of The Intelligent Use of Water®, this timer offers simple water saving features that you will actually use. With the flexibility of 3 programs and 4 start times available per program, you can tailor your watering schedule to your landscape’s needs. 

Best of all, you can upgrade the ESP-TM2 into a WiFi-enabled timer by simply installing a new LNK WiFi Module, without having to replace the entire unit.

Make your controller SMART with EPA WaterSense certification by adding the LNK WiFi module and a WR2 rain sensor

Controller Hardware

Plastic wall-mount cabinet with door

Mounting screws with anchor shields

Factory installed pigtail

Controller Features 

Easy to navigate user interface

Rain sensor input with bypass capability

Master valve/pump start circuit

Nonvolatile (100 year) storage memory

Electronic diagnostic circuit breaker

Remote accessory port for Rain Bird approved accessory devices

Scheduling Features

Program based scheduling with 3 individual programs and 4 independent start times per program for 12 total start times

Watering schedule options: Custom Days of the week, ODD or EVEN calendar days, or Cyclic (every 1 – 30 days)

Advanced Features 

Compatible with Rain Bird LNK WiFi Module (sold separately) to enable remote programming, operation and alerts from the Rain Bird mobile app.

Manual Watering option for all stations, a single station or an individual program

Seasonal Adjust applied to all programs or an individual program

Delay Watering up to 14 days (applies only to stations set to obey Rain sensor)

Permanent Days Off (for Odd, Even or Cyclic programming)

Sensor bypass for all programs or for individual stations

Adjustable delay between stations

Contractor Default™ Program Save and Restore saved program(s)

Master Valve on/off by station

Automatic short detect with station specific alarm messages

Operating Specifications

Station timing: 1 minute to 6 hours

Seasonal Adjust: 5% to 200%

Max operating temperature: 149°F (65°C)

Electrical Specifications

Input required: 120VAC (±10%) @ 60Hz

Output: 1A at 24VAC

Master Valve/Pump Start Relay

External battery back-up not required. Nonvolatile memory permanently saves the current programming and a 10 year life lithium battery maintains the controllers time and date during power outages.

Certifications

UL, cUL, FCC Part 15b, IP24

Dimensions

Width: 7.92 in. (20,1 cm)

Height: 7.86 in. (20,0 cm)

Depth: 3.51 in. (9,0 cm)