Increase your accuracy and precision with this Printed Centering and Rifling (PCAR) attachment. Available in a huge array of options including twist ratios, line counts, attachment methods, and more. Oh yeah, it can also shoot MEGA XL or Missiles! My preferred option on my Worker Harrier is a 3-line 60 or 90-degree option for Thin darts See below for details on selectable options.

Contact me for other options like 17/32" mounting. I have several more options still planned!
This offering is for Adventure Force and Dart Zone Muzzles. It utilizes a set of two outer O-rings to seal and stabilize the PCAR in the muzzle.

This PCAR includes a very short section of ramping (the dart does NOT hit the rifling at its tightest diameter immediately upon entering the PCAR). It is strongly recommended to only purchase PCARs that include ramping as those that do not can cause dart shredding/damage.

You will need to choose the number of lines (3, 4, 6), degrees of twist (45, 60, 75, 90, 120, 150, or 180), and the dart spacing (Thick or Thin). In the personalization notes, let me know if you want it to be an adapter to shoot MEGA XL darts or Missiles as well or to just thicken the design for even more durability. By default, I send the PCAR as a MEGA XL adapter.

• NUMBER OF LINES
3, 4, or 6. The more lines there are, the more friction there is and the more FPS loss you will have. This may be desired if you are wanting to lower the FPS of your blaster. It also enforces the spin on the dart more as it passes through.

• DEGREES OF TWIST
This is highly dependent on the FPS you are firing your blaster. Higher FPS requires lower twist / fewer degrees. My 90-degree version is slightly less than a 1:8 twist (like 1:9) while the 120-degree version is slightly more than a 1:8 twist ratio (something like 1:7) and so on. Variations are offered in the degrees of twist over the length of this PCAR, which is 60mm long, rather than a specific twist ratio (1 full rotation in a certain amount of inches). I plan to have a chart uploaded soon that shows the exact ratio per degree offering.

• DART SPACING
Not all darts are the same thickness. From my personal observations, there are roughly two tiers. Thicker darts (Worker Gen 2, Worker Gen 3, Game Face, and AF Pro) and thinner darts (Dart Zone Max, Dart Zone Pro, Dart Zone Bamboo, and Worker Bamboo). Choose Thick or Thin depending on your setup. It's close enough that either option would work for both groups but may not be as effective as the one made for it.

ATTRIBUTION: Designed by Transmogrification Labs.

INCLUDES: 1x "Twisty" PCAR with O-rings.

VERSION INFO: Currently shipping version 1.0.

INSTALLATION: Simply insert it into the muzzle of the blaster.

MATERIAL NOTES: This product is printed in PETG material which offers superior thermal resistance and increased durability compared to PLA products. PETG has a higher glass transition temperature of 80°C whereas PLA is 60-65°C. For PLA, this is within range of the temperatures that often occur inside a vehicle during summertime so items made from PLA may end up warping in those situations. The same issue can possibly occur from exposure to direct sunlight if the temperature is high enough. PETG has a much higher glass transition temperature however so you are very unlikely to ever experience issues with it warping in addition to it just being stronger in general. PETG products do come at a higher cost than the same product in PLA because PETG takes longer to print and also requires more time to clean up after printing but the result is a very high-quality product.

DISCLAIMER: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts by themselves or in combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have slight imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength.

B-STOCK: B-stock items are items that are only defective in appearance and are offered at a discount for this reason. They should function like the normal product unless otherwise specifically noted in the listing.


Powered by ExportYourStore.com