This "skinny" dart pusher for the Adventure Force Aeon Pro allows you to insert and remove magazines from the blaster without needing to prime the blaster (in other words, with the top prime not pulled back instead of only when priming)*. Also serves as a great replacement if you broke your original pusher somehow (it can happen). You can either keep the O-rings from your original pusher or buy replacement O-rings of the correct size (there is an add-on I offer which is for 3 pusher replacement rings and 2 telescoping tube O-rings to be included).

Short-dart-only version removes some of the slack/slop from priming!

O-rings can also be purchased separately here: https://www.etsy.com/listing/1086744081

Message me if you need a custom color option.

*Note: You will still not be able to insert or remove a magazine when you don't have the priming slide fully forward or fully backward. This is because the ends of the pusher are still round (because they have to be to make a seal with the tube) and the mag will catch on that portion.

Includes: 1x Adventure Force Aeon Pro Skinny Pusher, 3x pusher replacement O-rings (if purchased), 2x pusher-to-tube coupling replacement O-rings (if purchased).

Installation: Simply disassemble the blaster, remove the old pusher from the plunger tube, take the O-rings off the old pusher if needed, put O-rings on the new pusher, push the pusher back into the plunger tube, and reassemble the blaster.

Notes about material: This product is printed in PETG material which offers superior thermal resistance and increased durability compared to PLA products. PETG has a higher glass transition temperature of 80°C whereas PLA is 60-65°C. For PLA, this is within range of the temperatures that often occur inside a vehicle during summertime so items made from PLA may end up warping in those situations. The same issue can possibly occur from exposure to direct sunlight if the temperature is high enough. PETG has a much higher glass transition temperature, so you are very unlikely to ever experience issues with it warping in addition to it being stronger in general. PETG products do come at a higher cost than the same product in PLA because PETG takes longer to print and also requires more time to clean up after printing but the result is a very high-quality product.

Disclaimer: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts alone or a combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have visual imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength.

Attribution: Remixed by NerfEspeon (https://www.thingiverse.com/NerfEspeon) from an original design by WoodstockNerf (https://www.thingiverse.com/WoodstockNerf). Short-dart-only version remixed by Transmogrification Labs from NerfEspeon's remix.


Powered by ExportYourStore.com