eBay

Thanks for choosing RC Engine Bearings USA (cbr10006zu2)

Many thanks to our new and regular customers, we've been on Ebay over 23 years.

We do combined Shipping and send you a refund as soon as we do your orders.

If you don't see your Engine listed email me I have sets for most engines.

PLEASE CHECK FITMENT GUIDE BELOW

We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade soft metals general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We get our Bearings from proven reliable US Bearing Suppliers. We have Fast US Shipping from USA.

INTERNATIONAL SHIPPING Discontinued until problems with pricing and shipping are resolved.

(Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)

I've rebuilt over 800 Model Engines if you need Help just email me.

You are buying (1) SET (2) Premium BEARINGS with Printed installation Instructions .

SEE ENGINE FITMENT BELOW

6900 ID 10mm x OD 22mm x Width 6mm Dimensions

16003 ID 17mm x OD 35mm x Width 8mm Dimensions

EVOLUTION 61 NT

MAGNUM XLS 61A

SK 0.90

V-MAR V-MAX 61

NGH17 17cc gas engine

If you don't see your engine listed email me, I have sets for most engines.

(1) NACHI (Japan) Premium ABEC3/C3 REAR HC Chromium Deep Groove High Speed Full Metal Cage (OPEN) Bearing.

(1) HCHEMQ FRONT Premium Grade ABEC3/C3 Deep Groove High Speed Full Metal Cage HC Chromium Steel Sealed Premium true Seals with Mobil EM2 high temp Grease (Options/Seals (2) , Open or Seal on One Side) Front Bearing Ships with Both Seals.

Seals	Textured Rubber Double Lip Seals on each side of the bearing
Lubrication	Wide temperature range Mobil Polyrex EM2 (-40°F to + 350°F)
Noise Testing	Noise tested before and after lubrication
Noise Level	Passes V1 Noise Vibration Standards Smaller Sized, V2 Standards. Large Bore- Meets or exceeds Motor Requirements
Precision Balls	Matched ABMA Grade 10 or better for roundness
Raceways	Finely honed Super Finished for long life and low noise
Quality Level	Premium bearings meet or exceed ABEC 3 tolerances
Testing	Independent Endurance testing has verified our Premium bearings Outperformed all low cost bearings and matched or exceeded the performance of well-known brand name bearings

USA SELLER 22+ Years US Shipping fast, shipped from the US with Instructions and Tips in English to help with your rebuild.

Why Settle for Econo or Standard abec1 low grade or non certified bearings that are often rough, feel gritty even new and most likely won't stand the test of time.

Discounts for multiple Bearing Orders.

Thanks again to all our regular and new Customers for our 5 Star seller.com Internet Rating.

Engine BEARING Care and storage info.

Why pay $30 or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.