FEICHAO ExpressLRS RX24T 2.4G ELRS Radio Nano Long Range Receiver for FPV Racing Long Range Drones DIY Parts LR4 LR5
Specification: 2.4G ISM type ESP8285 MCU SX1280IMLTRT RF Frequency range: 2400 MHZ To 2500 MHZ Maximum receiving refresh rate: 500HZ Minimum receiving refresh rate: 25HZ Working voltage: 5V Weight: 0.6g (without antenna) Size: 11mm*18mm*3mm RX24T: Half-wave dipole omnidirectional T-shaped antenna Peak gain: 3.16dB Indicator status: Double flash: code matching mode Slow flashing: No transmission signal is received Steady on: receive the transmit signal Fast flashing: WIFI upgrade mode Linking steps: 1. After the receiver is connected to the flight controller, connect the USB to power the flight controller. After inserting the USB for the first time, disconnect the USB as soon as the LED on the receiver turns off. Repeat the operation twice, when the USB is inserted for the third time, the LED will start to flash double, and the receiver will enter the code matching mode. 2. After correctly connecting the 2.4G ELRS tuner module and the remote control, copy the ELRS.LUA file to the SD card in the remote control, the directory is SD Card/Scripts/tools, and then run ELRS.LUA for Bind operation. 3. After the binding is successful, the LED on the receiver will become steady on, and the telemetry signal can be received at the same time. Package Include: Receiver * 1 Wire * 4 T-type antenna *1