|
High Strength & High Toughness
Based on the classic Anycubic standard resin, the Anycubic standard resin V2 further enhances toughness,
boasting an increase of 93% in elongation at break. The finished models are resistant to impact, durable,
and less prone to breaking, while still maintaining a certain degree of flexibility.
Wide Application
As an entry-level resin, Anycubic Standard Resin V2 with a high success printing rate at the same time, is suitable for printing high intensity models that require high strength and toughness, such as
industrial parts, assemblies, tools, architectural models, prototype proofing, figure design, etc.
|
Anycubic Standard Resin V2 Resin Parameters
UV Wavelength
365-405nm
Elongation at Break
25-30%
Density
1.05-1.25g/cm³
Molding Shrinkage
4.3-5.6%
Viscosity
250-350cPimPa·s
Flexural Strength
40-50MPa
Hardness
80-83D
Felxural Modulus
1500-2100MPa
Tensile Strength
35-45MPg
Heat Deflection Temp
60-65℃
Bottom Exposure Time
20-40s
Resin Wash
Alcohol
Normal Exposure Time
1.5-3s
Shelf Life
1.5 Year
|
|
|
|
|
ANYCUBIC UV Tough Resin
|
|
|
- Video Display -
|
|
|
|
Extremely High Precision Anycubic DLP printer built the same 3d model twice respectively with DLP Craftsman resin and general resin for comparison. When zooming in ten times to the surface of the model, we can see that the DLP Craftsman resin appears to have a smooth and exquisite surface, while general resin gets a blurred surface with obvious layer lines.
|
Fast Speed, Low Shrinkage Due to the upgraded formula, Anycubic DLP Craftsman Resin can improve the printing speed and lower the shrinkage rate of 3d models. The first exposure time can be as fast as 35 seconds, and the normal exposure time can be as fast as 2 seconds per layer. Molding shrinkage is as low as 3.7%.
|
|
ANYCUBIC ABS-Like Resin V2
|