JINGLING 10Pcs 3-10 mm SHORT INVERTED CONICAL Diamond Grinding Head Lapidary Carving Tools Code 30E/40E/50E/60E/80E/100E*2.35mm
Product Specification:
Product Name: Diamond Grinding Head
Head Diameter : 3mm/ 4mm/ 5mm/ 6mm/ 8mm/ 10mm
Please select the Head Diameter you need
Head Shape: SHORT INVERTED CONICAL
Shank diameter: 2.35mm (3/32" inch)
Suitable for electric nail drill, carving machine, machinery supporting assembly with a 3/32" collet
Total Length : 42mm (1-21/32")
Quantity: Only 10 Pieces
Grit: 60-80 (Coarse)
|
Head Diameter |
Shank diameter |
Total length |
Grit |
Quantity |
Head Shape |
Code |
|
3mm(1/8") |
2.35mm(3/32") |
42mm (1-21/32") |
80 Coarse |
10Pcs |
SHORT INVERTED CONICAL |
30E |
|
4mm(5/32") |
2.35mm(3/32") |
42mm (1-21/32") |
80 Coarse |
10Pcs |
SHORT INVERTED CONICAL |
40E |
|
5mm(3/16") |
2.35mm(3/32") |
42mm (1-21/32") |
80 Coarse |
10Pcs |
SHORT INVERTED CONICAL |
50E |
|
6mm(1/4") |
2.35mm(3/32") |
42mm (1-21/32") |
80 Coarse |
10Pcs |
SHORT INVERTED CONICAL |
60E |
|
8mm(5/16") |
2.35mm(3/32") |
42mm (1-21/32") |
60 Coarse |
10Pcs |
SHORT INVERTED CONICAL |
80E |
|
10mm(3/8") |
2.35mm(3/32") |
42mm (1-21/32") |
60 Coarse |
10Pcs |
SHORT INVERTED CONICAL |
100E |
The speed of 2800-10000 r/min, ectric grinder speed as high as possible.
The diamond mounted point can be installed on the electric grinder, hanging mill and hand electric drill (not included here). Never use drills while machine is in hammer action.
Description: Inverted Conical Shape, electroplated diamond head.
Product use: Apply to stone carving, jade carving, gem peeled, bone carving, egg decorating, glass carving etc.
Used for sculpturing, dressing, precision grinding and internal grinding carbide in ceramic, glass, precious stone, alloy and many the abrasive materials
Use with water as a lubricant
Note: carving must use cold water to cool the workpiece and the grinding head polishing, moment also can’t do without water
We Can List Any Size (Head Diameter from 3mm - 35mm)& Amount Of This Product
Regular Air postage from China to Worldwide and takes 10-30 days delivery to your home
We will send out your order within 1-2 days after payment has been received and cleared.
Please let us know if you are looking for other accessories or hardware.
Just a friendly reminder: The Shank diameter of grinding bit is 2.35mm (close to 3/32")
There are two different collet sizes for Dremel: 3mm (1/8") or Universal 3-jaw chuck
If your chuck of Dremel(models 4300-8050) has an Universal 3-jaw chuck, then the grinding bit can be installed directly
However, it is NOT suitable for dremel with 3mm 1/8" chuck(such as:models 3000,4000)
If your chuck of Dremel is 3mm (1/8"), maybe you need add the Universal 3-jaw chuck for Dremel
