mobula7 configuration:

Spare Parts Specifications:

motor

Model: 0802 KV20000

Configuration: 9N12P

Stator diameter: 8 mm

Stator length: 2 mm

Shaft diameter: Φ1 .5 mm

Motor size (Dia.*Len): Φ 10.5 mm*1 3.5 mm

Weight (g): 2.0 g

Voltage: only 1S

propeller

Weight: 0.24g

Material: PC

Spacing: 1 inch

Diameter: 40mm

Center thickness: 5mm

Center hole diameter: 1.5mm

flight control

X12 ELRS V1.0 flight control built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280

X12 Frsky V1.0 flight control built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR

X12 Flysky V1.0 flight control built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS

MCU: STM32F411CEU6 (100MHZ, 512K FLASH)

Sensor: MPU6000 or ICM20689 (SPI connection)

Mounting hole size: 25.5mm*25.5mm

Power supply: 1 S battery input (DC 2.9V - 4.35 V) built-in 12 A (each) Blheli_S 4-in-1 ESC

Built-in Betaflight OSD (SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G, Frsky D8/D16, Flysky AFHDS 2A Built-in voltage detection

Built-in current sensor

Onboard 4-in-1 ESC

Power supply: 1 S LiPo/LiPo HV

Current: 12 A continuous peak 15 A (3 seconds) supports BLHeliSuite

Programmable factory firmware: Z_H_30_REV16_7.HEX

Default protocol: DSHOT 3 00

Onboard SPI ExpressLRS 2.4GHz receiver

Packet rate options: 50Hz/150Hz/250Hz/500Hz

ExpressLRS Firmware Version: V2.0 RF Frequency: 2.4GHz

Antenna: Patch Antenna Telemetry Output Power: <12dBm

Receiver Protocol: SPI ExpressLRS

Compatible with ExpressLRS V2.0 TX modules

Cannot flash ExpressLRS firmware alone

Onboard Frsky SPI D8/D16 receiver version

SPI BUS Receiver Frsky D8 Compatible Compatible with Non-EU Transmitter D8 Models

Channel: 8ch without ground interference (transmitter and receiver are 1 meter away from the ground): 200 meters

Failsafe support

Onboard Fly sky SPI receiver version

SPI BUS receiver protocols: AFHDS and AFHDS-2A

Switchable channels: 8ch(AFHDS) or 14ch(AFHDS-2A)

No ground interference (transmitter and receiver 1 m from the ground): 200 m failsafe support

image transmission

Smart Speaker v2.1

Pit mode support

RCE mode support

Channel: 48ch

Transmit power: 0/RCE/ 25mw/100mw/ 4 00mw

Power supply: DC 5V

Current (5v): <650ma (4 00mw)

camera

Model: RunCam Nano 3

Image Sensor: 1/3" CMOS

Horizontal resolution: 800TVL

Lens: 2.1mm(M8) FOV 1 5 0°

Signal system: NTSC

Signal-to-noise ratio: >50dB

Electronic Shutter Speed: Auto

Automatic Gain Control (AGC) : Automatic

minute. Illumination: 0.01Lux@1.2F

D-WDR : Automatic

Day/Night: Color

Power supply: DC 3-5.5V

Current: 110mA@5V 120mA@3.3V

Shell material: ABS

Net weight: 1.2g

Size: L14mm*W14mm*H9mm

lithium battery

Capacity: 65 0mAh

Voltage: 3.8v

Continuous discharge rate: 30C

Instantaneous discharge rate: 60C

Dimensions: 60mmx18mmx8mm

Weight: 16g

Connector: PH2.0

mobula6 configuration:

AIO flight control with ELRS receiver and 5.8G VTX

Ultralight 1S 65mm brushless whoop only 18.7g

Device with lightest brushless motor - SE0702 only 1.46 grams

Runcam Nano3 Lightest 1/3 CMOS 800TVL Camera

smooth and powerful

Compatible with 1S Lipo/LIHV

Specification:

Product name: Mobula6 ELRS version

Wheelbase: 65 mm

Size: 80mm*80mm*37mm

Weight: 18.7g

Note: Please refer to our pictures to choose the desired combination, all parts are sold separately in our store, you can add as spares. If you have any questions, please feel free to contact us.