Feature:
1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information;
2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed.
3.Sixteen Channels of output,the output can be independent.remote distance:150m(Theoretical value)
4.Using wireless encoding technique,no direction,no mutual interference
5.Adopting larger capacity relay,can control electrical equipment of more than 1000W
6.Mainly applied for: Remote control of the on and off of pump,machine-tool,LED lights and other civil and industrial supporting remote areas
7.Learning type can be paired with more than one control.
8.Can switch the working mode between inching(Factory Default), self-locking and interlocked

Transmitter
Color: White & Blue
Material: ABS Plastic+Metal
Operating Voltage: 12V
Operating Frequency: 433Mhz
Vibration Resistance: 4.7M
Chip Type: 2264
Modulation: ASK (Stable, less interference)
Encode Type: Welding code
Battery Type: 12V 23A(not included)
Remote Distance: 150m (Theoretical value)
DIM: Approx. 130 x 50 x 18mm/5.12 x 2.95 x0.71Inch(L x W x T)

Receiver
Color: Green
Material: ABS Plastic+Metal
Input Voltage: DC 12V
Operating Frequency: 433Mhz
Coding Way: Intelligent Learning
Output Type: Passive output(12V)
Max load: 7A
Factory Default: Inching
DIM: Approx. 120 x 50 x 15mm/4.53 x 2.95 x0.59Inch(L x W x T)
Brand Name:Unbranded
Weight:264g

Operation Way and Steps:
1. Factory Default is Inching Mode.
Press and hold the button A, the Receiver A (Relay A)turns on; Release the button A, the Receiver A (Relay A) turns off.
2. Each transmitter and receiver have been finished linking and factory default mode(Self-locking Mode) has been set up. When you receive them, you do not need to link again, you just need to connect the wiring according to our wiring diagram layout.

About three modes:
1)Inching Mode:
Press and hold the button A, the Receiver A (Relay A)turns on; Release the button A, the Receiver A (Relay A) turns off.
2)Self- lock Mode:
Press the button A, the Receiver A (Relay A) turns on; Press the button A again, the Receiver A (Relay A) turns off.
3)Interlocked Mode:
Press the button A, the Receiver A (Relay A) turns on; Press the button B, the Receiver B (Relay B) turns on, the Receiver A (Relay A) turns off.

If you want to change the factory default mode to other two working mode, below is the operation steps:
1. Clear:
Press and hold the learning button on the receiver board, for several seconds, till there is a sound, then release the learning button. It means clearing succeed, previous mode will not work after clearing successfully.
2. Choose the Working Mode:
There are four solder pins and 2 jumper caps on the receiver board.
1)Use the Jumper cap to cover position ""3"" & ""4"", leave the position ""1"" & ""2"" empty, all the 16 relays' working mode is Inching Mode
2) Use the Jumper cap to cover position ""2"" & ""4"", leave the position 1 & 3 empty, all the 16 relays' working mode is Self-lock Mode.
3) Use the Jumper cap to cover position ""1"" & ""3"", leave the position 2 & 4 empty, all the 16 relays' working mode is Inter-lock Mode.


Note:
1.The receivers in our store are mainly used together with the related transmitter in our company. If you want to use your own transmitter, please confirm if the operating frequency, chip type and vibration resistance of your transmitter are in accordance with ours. If not, they will fail to be linked to. If you want to order the related one,we have unique transmitter as well.

2.How to confirm if the operating frequency, chip type and vibration resistance of your transmitter are in accordance with ours?
--Connect the receiver board to give power for it,and the power light on the receiver board will turn green,press your transmitter,if the signal light on the board flash red light,it means your transmitter is in accordance with our receiver;if the signal light do nothing(not flash) when you press the transmitter,it means your transmitter can not be used for our receiver

3.If you choose the interlock mode,because the quantity of the buttons on the transmittter is the same as the relays, there will be always a relay stay ON, no button to turn off the last relay, please cut off the power to turn off the last relay.

Package Includes:
2 X Transmitters (Battery is not included)
1 X Receiver
1 x Case
1 x Cable
1 x Screwdriver