Feature:
1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information;
2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed.
3.Three Operation Ways: Interlocked(Default), Self-locking, Inching.
4.The transmitter has three buttons: Up, Down and Stop.
5.Commonly used in motors, electrical machine and Industrial equipment.
6.The learning code button on the PCB board can also used as stop button.
7.Limit function switch, 2 kinds of using, Wireless remote control, also can use the wire connect the switch to control it.

Specification:
Color: Grey
Brand name: Unbranded
Material: ABS Plastic + Metal
Operating/Input Voltage: DC 12V
Operating Frequency: 433Mhz
Weight: 154g

Transmitter
Operating Frequency: 433Mhz
Vibration Resistance: 4.7M
Modulation: ASK (Stable, less interference)
Encode Type: Pads
Battery Type: 12V 23A(not included)
Remote Distance: about 150m(Theoretical value)
Ambient TEMP: -30°C -70°C, Humidity<95%
Size: 95 x 40 x 13mm/3.74 x 1.57 x 0.51 inch (L x W x H)

Receiver
Factory Default: Interlocked
Operation Way: Inching, Self-locking, Interlocked
Coding Way: Intelligent Learning
Output Type: Passive Output
Max load: 10A
Ambient TEMP: -20°C-65°C, Humidity<95%
Size: 74 x 54 x 28mm/2.91 x 2.13 x 1.1 inch (L x W x H)

Note: The limit function only works in Interlock mode. In addition, the interlock mode, add the program to protect the motor, in order to avoid the motor does not stop the button and a direct reversal, when you accidentally press the wrong button. Cause that will damage the motor and reduce motor life.

How to connect it to a motor:
Two normally closed terminals to the positive pole of power supply. Two normally open terminals to the negative pole of power supply. Two common terminals to the two power wires of the motor.

Operating Instructions:
1. The Factory Default is Interlocked.
Press the button A, the Receiver A (Relay A) turns on; Press the button B, the Receiver B (Relay B) turns on, the Receiver A (Relay A) turns off.
2. Each transmitter and receiver have been finished linking and factory default mode has been set up. When you receive them, you do not need to link again, you just need to connect the wiring according to our wiring diagram layout.

Operation Way of three modes:
1. Inching: Press and hold the button A, the Receiver A (Relay A)turns on; Release the button A, the Receiver A (Relay A) turns off.
2. Self-lock: Press the button A, the Receiver A (Relay A) turns on,; Press the button A again, the Receiver A (Relay A) turns off.
3. Press the button A, the Receiver A (Relay A) turns on; Press the button B, the Receiver B (Relay B) turns on, the Receiver A (Relay A) turns off.

If you want to change the factory default mode to other working mode, below is the operation steps:
1. Clear:
Press and hold the program button on the receiver, the tomato light will turn on and stay on for about 5 seconds, till the tomato light turns off, then release. Now the factory default has been removed.
2. Change to Inching Mode:
Press and hold the program button on the receiver, the tomato light will turn on and stay on for about 5 seconds, then turn off (Clearing Steps), do not release, still hold the learning button, and then the tomato light will begin to flash.
(1)After the light flashes ONCE, release the learning button, it becomes Interlocked Mode.
(2)After the light flashes TWICE, release the learning button, it becomes Self-lock Mode.
(3)After the light flashes THREE times, release the learning button, it becomes Inching Mode.
3. Link the remote control:
(After the Working Mode is chosen, you can start to link the remote control according to the mode you choose)
Press the learning button on the receiver until the tomato light turn on, and then release the learning button, the tomato light will stay on. Press one button on the transmitter, the tomato light (Signal Light) on the receiver board will flash, then press the second button, the tomato light (Signal Light) will flash and finally turns off, at this time, it means that the transmitter and receiver finish linking. Then you can press the button on the transmitter, the related receiver will work as the mode you choose.

Note:
1.The receivers in our store are mainly used together with the related transmitter in our company. If you want to use your own transmitter, please confirm if the operating frequency, chip type and vibration resistance of your transmitter are in accordance with ours. If not, they will fail to be linked to. If you want to order the related one,we have unique transmitter as well.

2.How to confirm if the operating frequency, chip type and vibration resistance of your transmitter are in accordance with ours?
--Connect the receiver board to give power for it,and the power light on the receiver board will turn green,press your transmitter,if the signal light on the board flash tomato light,it means your transmitter is in accordance with our receiver;if the signal light do nothing(not flash) when you press the transmitter,it means your transmitter can not be used for our receiver.

Package include:
1 x Transmitter (Battery is not included)
1 x Receiver
1 x Screwdriver
1 x Wire